What to Know About the Fulton High-Performance 2-Speed Trailer Winch for Strap or Wire Rope Video

While I cannot find the exact specifications for the hole pattern on the Fulton 142208 I was able to find dimensions for the Fulton High-Performance 2-Speed Trailer Winch #F142416. It is going to have the same bolt pattern as the Fulton Winch…

Whereas the Fulton #F142400 will work with just wire rope, like the #FWC3250100, the Fulton #F142401 will work with wire rope and also a strap, like the #FWS20HD0200. With both of these having a capacity of 2,000 ponds and being high performance 2…

The Fulton High-Performance 2-Speed Trailer Winch #F142412 that you referenced does not come with a strap. It is compatible with a 2 inch wide strap and the drum can accept a strap length of up to 20 feet. With this in mind the Fulton #FWS20HD0200…

I believe that the holes in the drum are meant to wind a cable through but not a strap. The strap should be held on with a bolt that is close to the center of the drum. If you need the bolt then all you will need is a 1/4 bolt, 2-1/2 inches long,…

The T1401 has been discontinued but based on my research that is a 1,400 lb winch with a 20 foot strap. To replace it, the best option is the very similar Fulton Trailer Winch #F142201. The #F142201 is a 1,500 lb winch that also uses a 20 foot strap;…

Fulton winches like the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap part #F142418 are made in Mexico according to Fulton. If you are looking for a winch made in the USA you may consider the Dutton-Lainson Covered Hand Winch part…

I do have a video for the Fulton #F142401 which is nearly identical to the #F142400 that you were looking at. The only difference is that the #F142401 can be used with a strap or wire rope, while the #F142400 can be used with rope only. Other than…

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

I attached a picture that has all of the mounting hole dimensions of the Fulton winch part #F142400 that you referenced.

Hey there David; thanks for the question and I was able to get the dimensions for you of the Fulton High-Performance 2-Speed Trailer Winch #F142401. I added the dimensions of the #F142401 to the handy diagram you made (which I appreciate you…

To replace the grease in a hub that has Bearing Buddies is the same as hubs with standard grease caps. You'll want to pull the hub off, remove the seal, remove the bearings and then remove the grease the "old-fashioned way". Some people…

Yes, you can change winch speeds with the Fulton winch part #F142401 with a load on the winch. There would be no need to not have a load on the winch for the gear selector to go between the fast and slow speeds.