Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. The built-in spotter mirrors reduce blind spots, and the heated glass clears frost and ice.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
Product does not work on Duramax diesel models
More Information >Towing Mirrors Specs:
Features:
Custom, manual towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. And the built-in spotter mirrors reduce blind spots.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
Product does not work on Duramax diesel models
More Information >Towing Mirrors Specs:
Features:
Custom-fit towing mirrors securely snap over your vehicle's factory mirrors. They match the contours of your factory mirrors and retain use of factory puddle lamps. Simple, tool-free installation.
Installation Notes:
Product does not fit models with telescoping mirrors
More Information >Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. An LED arrow turn signal is built into each mirror face, and the heated glass clears frost and ice.
Installation Notes:
Additional features may be lost, as these mirror replacements may include some functions, but they do not include all of the functions
Product does not work on Duramax diesel models
Tech Tip:
Mirror includes LED arrow turn signal.
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on…
view full answer...We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…
view full answer...On a single axle trailer you will want to have a hanger spacing of around 22-3/4 inches when using the 23-1/8 inch long Double-Eye Spring #e59SR. This will allow that rear shackle to correctly lean away from the axle for proper suspension travel.
view full answer...Yes! What you're going to need for your 2022 Chevrolet 2500HD, is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...