This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides corrosion resistance.Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Square mounting holes Mounting hardware not included Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides corrosion resistance.Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Round mounting holes Mounting hardware not included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Snap-in mounting point for trailer rails adds a cleat-style anchor for wrapping and tying rope exactly where loads move. No drilling, no permanent hardware, just fast rope management and dependable cargo control.Highlights Take Control of Your Cargo: Create secure, adjustable tie-down points on angle iron trailer supports where you need them. No Permanent Installation Needed: Slide-in design and safety snap pin make securing your load effortless and reliable.
Replacement or add-on tie-down ring lets you secure cargo to your Super Track system (sold separately). Spring-loaded swivel design allows for quick, easy positioning. ... Features: Tie-down ring lets you secure cargo quickly and easily Designed for use on your Super Track system from Buyers Products (337ST93 - sold separately) Spring-loaded attachment allows for secure and easy positioning along track Ring swivels for easy accessory hookup Zinc-plated steel construction is durable and corrosion resistant Specs: Overall dimensions: Inner diameter: 1-1/8" Outer diameter: 1-1/2" Safe working load limit (WLL): 1,000 lbs Quantity: 1 ring
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance.Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring rotates 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation Mounting hardware not included Optional backing plate provides greater support than if the anchor was mounted alone (sold separately - BP05) Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs.
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation to flat surface Mounting hardware not included Specs: Maximum load (break strength): 11,700 lbs Working load limit: 4,000 lbs Ring diameter: 1/2" Internal ring dimensions: 2-3/8" wide x 2-1/2" tall Dimensions: 3-1/2" wide x 3-3/8" tall 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs.Utility Trailer D-Ring TieDown Recessed Ring Swivels 360 Degrees Zinc Plated Bolt-On Design Capacity: 6,000 lbs. Safe Working Load Limit: 2,000 lbs. 4 bolt holes are 3-13/16" apart Bolt holes are 1/4" in diameter Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Surface-mount D-ring anchor serves as a tie-down point in your truck bed or trailer.Features: Round anchor ring provides a tie-down point in your truck bed or trailer D-ring folds flat when not in use Durable steel construction Bright zinc finish Surface-mount, bolt-on installation Specs: Load capacity: 1,200 lbs Mount dimension: 4-1/4" diameter x 5/16" thick D-ring dimensions (inner): 1-3/4" long x 1-3/16" wide D-ring dimensions (outer): 2-1/4" long x 1-11/16" wide Mounting hole spacing (center to center): 1-1/4" Mounting hole diameter: 1/4" Quantity: 1 anchor ring
Medium Duty Trailer TieDown Lashing Ring Steel with a zinc finish Capacity: 5,000 lbs Safe Working Load Limit: 1,600 lbs Diameter of mounting holes: 7/16" x 7/16" Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The stainless steel ring resists corrosion and bolts onto a flat surface. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Stainless steel construction resists corrosion and retains its strength through repeated use Constructed of Grade 304 stainless steel Simple, bolt-on installation to flat surface Mounting bolts not included Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs Ring diameter: 3/16" Usable internal ring dimensions: 1-1/2" wide x 1-5-16" tall Mounting bracket dimensions: 1-3/16" wide x 3-1/2" long Distance between mounting holes center to center: 2-1/4" Mounting hole dimensions: 7/16" x 7/16" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The corrosion resistant zinc-plated ring sits in a plastic bezel and bolts onto any flat surface.
These surface-mounted D-rings are recessed so you can easily roll or slide your cargo over them, and they reduce tripping hazard. Create attachment points for ropes, straps or bungee cords to secure push mowers, tillers, and other lightweight cargo.Features: Light-duty tie-down anchors provide solid points to secure your cargo with ropes, straps or bungee cords Let you anchor push mowers, tillers, and other lightweight cargo on your truck, utility trailer or enclosed cargo trailer Recessed design lets cargo roll or slide over anchors with no interference D-rings rotate over 90 degrees so you can attach your ropes, strap or bungee from multiple angles Steel construction with clear-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Quantity: 4 Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs D-ring dimensions: Thickness: 1/4" Inner diameter: 1-5/8" wide x 1-3/16" long Overall width: 2-1/8" Base plate dimensions: 4-3/16" diameter x 7/16" tall Distance between mounting holes (center to center): 1-1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 2.5-mm stainless steel, the low-profile tie-down anchor stands up to harsh weather, road chemicals and marine use. ... Features: Single E track anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps, ring attachments and any E track accessories (sold separately) 2.5-mm Stainless steel with matte finish stands up to harsh weather, road chemicals and marine use Made in the USA Specs: Dimensions: 5-3/4" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/8" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for boaters, movers, motorcyclists and towers, the Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies.
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. ... Features: Single E track anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps and ring attachments and with any E track accessories (sold separately) Sturdy, 3.5-mm steel construction Matte-zinc-finished surface resists rust Made in the USA Specs: Dimensions: 5-15/16" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/16" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, the low-profile, black tie-down anchor blends with your vehicle's trim. ... Features: Single E track anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps and ring attachments and with any E track accessories (sold separately) Sturdy, 3.5-mm steel construction Black powder coat finish resists rust Made in the USA Specs: Dimensions: 5-3/4" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5" apart on center Mounting hole dimensions: 0.327" x 0.327" square Accepts 5/16" hardware Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
Install this anchor ring in your trailer or truck bed or anywhere else you use tie-downs. Its sturdy base bolts onto any surface (hardware not included). Strong steel construction with a rust-resistant e-coat finish.Features: Anchor ring provides an attachment point for securing tie-downs such as bungees, straps, and ropes Ideal for use in trailers and truck beds Surface mount - requires (4) 3/16" bolts or screws (not included) Strong steel construction Rust-resistant black e-coat finish Specs: Ring dimensions: 3/16" thick x 2" diameter Maximum load (break strength): 2,000 lbs 90-Day limited warranty
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Surface-mount design doesn't require you to cut a hole in your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Simple, bolt-on installation on flat surface Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Light Duty Trailer TieDown Lashing Ring Capacity: 1,000 lbs. Safe Working Load Limit: 330 lbs 1-1/2" D-Ring Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. Simply bolts onto any flat surface. No need to cut a mounting hole. Zinc-plated steel ring and mounting bracket resist corrosion.Features: Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control Simple bolt-on installation Mounting bolts not included Surface-mount design No need to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists rust and corrosion Optional backing plate (BP12) provides additional strength when mounting to thin steel or wood Specs: Maximum load (break strength): 1,500 lbs Safe working load limit (WLL): 500 lbs Ring diameter: 1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Add a tie-down point to a truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, the low-profile tie-down anchor is unfinished and ready for custom paint colors. ... Features: Single E track anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps, ring attachments and any E track accessories (sold separately) 3.5-mm Bare steel construction Unfinished surface can be painted to match your trailer or vehicle Made in the USA Specs: Dimensions: 5-15/16" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/16" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 400 lbs.For example, if you are using anchors with a WLL of 100 lbs each to tiedown a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
This durable steel D-ring creates an attachment point for rope, tie-down straps, or bungee cords wherever you need cargo control. The corrosion-resistant zinc-plated ring sits in a plastic bezel and bolts onto any flat surface.Features: Tie-down anchor provides a solid point to secure your cargo with rope, straps, or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed Anchor sits recessed in a plastic bezel, allowing cargo to slide over it D-ring rotates so you can attach rope from multiple angles Zinc-plated steel resists corrosion and retains its strength through repeated use Simple, bolt-on installation to flat surface Mounting bolts not included Specs: Maximum load: 800 lbs Working load limit: 265 lbs Ring diameter: 1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Heavy-duty D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring.Features: Heavy-duty tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Simple bolt-on installation Square holes are designed for carriage bolts (not included) Maximum load (break strength): 6,000 lbs Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This anchor has a sleeve that mounts under the D-ring to help prevent it from rattling when not in use. It lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer to secure ATVs, UTVs, and other heavy cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Sleeve under D-ring keeps anchor tight and helps prevent rattling D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,666 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-1/4" wide x 2-3/16" long Overall width: 3-1/4" Mounting bracket dimensions: 3-1/8" long x 1-3/4" wide Distance between mounting holes (center to center): 2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
