Adapter sleeves let you use 2" and 2-1/2" hitch-mounted accessories with your 3" hitch receiver. Add the small sleeve to use 2" accessories with a 2-1/2" receiver. ... Features: Reduces your 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" or 2" x 2" Small sleeve can be used separately to reduce a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2-1/2" and 2" towing and hitch-mounted accessories Installs easily - slides directly into your hitch or onto the shank of your accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 3" x 3" hitch receivers Overall length: 6-3/8" Distance from receiver end to center of nearest pin hole: 2-1/2" Distance from accessory end to center of nearest pin hole: 3-7/8" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
Adapter sleeves let you use 2" and 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver. Use the small sleeve separately to use 2" accessories with a 2-1/2" receiver. ... Features: Adapters reduce a 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" or 2" x 2" Small sleeve can be used separately to reduce a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2-1/2" and 2" towing and hitch-mounted accessories Easy to use - slides directly into your hitch or onto the shank of your accessory Durable, carbide black powder coat finish Specs: Pin hole diameter: 3/4" Limited lifetime warranty
Got a 2-1/2" hitch but need to run 2" accessories? This magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.Features to know about Magnets Make Setup Simple Reducers without magnets can slide around or fall out while you're trying to line up the pin, and that gets frustrating fast. This one's different. Magnets hold the sleeve in your 2-1/2" receiver so you're not wrestling with it, and the slot on the side gives you wiggle room so you don't have to line it up perfectly.
Adapter sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver. Hitch pin and clip or hitch lock are sold separately.
Got a 2-1/2" hitch but need to run 2" accessories? This Big Truck Big RV magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.You keep the full capacity of your 2-1/2" receiver while running 2" accessories. Expandable System This red sleeve works on its own or pairs with the black BTBRV 3" to 2-1/2" reducer (sold separately). Together, they step a 3" receiver down to 2".
This adapter sleeve with pinched ends lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver and stops when flush and holes are aligned. ... For Ram and Ford factory hitches and Draw-Tite aftermarket hitches, insert the reducer sleeve so that the pinched ends face out to the sides. For GM factory hitches and Curt aftermarket hitches insert the sleeve so that the ends are positioned on the top and bottom of your receiver.
1" ID x 2" OD x 3" Long. Replaces 1 rubber bushing with steel sleeve. Installs in the center bolt hole of your slipper spring for 10,000-lb to 15,000-lb Dexter axles.Features: Replaces rubber suspension bushing with steel sleeve Fits slipper spring suspensions for 10,000-lb to 15,000-lb Dexter axles Installs in center bolt hole of slipper springs Specs: Length: 3" Inner diameter: 1" Outer diameter: 2" Quantity: 1
If your hitch receiver and your towing equipment no longer match, this hitch adapter is a quick fix. Slide the reducer sleeve into your 2-1/2" hitch to instantly convert it to a 2" hitch receiver.
Carry your 2" hitch bike rack in your vehicle's 2-1/2" x 2-1/2" trailer hitch receiver. Raised tab prevents the adapter from sliding in too far. Compatible with Kuat flatlock hitch cam systems and standard hitch pin holes.
Got a 3" hitch but need to run 2-1/2" accessories? This Big Truck Big RV magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.You keep the full capacity of your 3" receiver while running 2-1/2" accessories. Expandable System This sleeve works on its own or pairs with the red BTBRV 2-1/2" to 2" reducer (sold separately). Together, they step a 3" receiver down to 2".
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts.Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 5/8" Outer diameter: 1-3/8" Length: 2-3/16"
If the hitch receiver on your new Ford F250 or F350 and your towing equipment no longer match, this hitch adapter is a quick fix. Slide the reducer sleeve into your 3" hitch to instantly convert it to a 2-1/2" hitch receiver.
Use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch by slipping this bushing into your receiver. Sturdy, black powder coated steel construction.
Use your 2-1/2" hitch accessories in your 3" receiver with this hitch reducer. Install the reducer on your accessory, then slide into your hitch receiver. Bolt-on design provides a quieter ride by preventing rattle.
This reducer sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. ...
This adapter sleeve with pinched ends lets you use 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver and stops when flush and holes are aligned. ... For Ram and Ford factory hitches and Draw-Tite aftermarket hitches, insert the reducer sleeve so that the pinched ends face out to the sides. For GM factory hitches and Curt aftermarket hitches, insert the sleeve so that the ends are positioned on the top and bottom of your receiver.
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Designed for use with Dexter heavy-duty axles with 10K to 15K capacity. Insert into the eye of your leaf spring to ensure proper sizing for suspension bolts.Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Designed for use with Dexter heavy-duty axles with 10,000-lb to 15,000-lb capacity Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4" Quantity: 1 bushing Rubber bushing for trailer suspension equalizers Works for 10,000-lb to 15,000-lb Dexter heavy-duty axles Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4"
If your hitch accessories have a 1-1/4" shank and your hitch is 2", this sleeve fixes that problem and lets them work together. It holds on to your stuff tight and keeps you from buying new gear just to make your setup work.Highlights Use Your Existing Gear: Lets you use 1-1/4" racks or accessories with your 2" hitch. Keep Your Setup Stable: One-piece reducer sleeve holds tight and keeps your gear from wobbling. Resist Rust and Wear: Carbon steel coating protects against corrosion and daily use.
This adapter sleeve lets you use 2" with your 2-1/2" hitch receiver, inlcluding Hollywood racks with no wobble system. Black powder coat finish resists corrosion. ... Features: Adapter reduces a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use bike racks with a 2" shank on your 2-1/2" hitch Easy to use - slides directly into your hitch or onto the shank of your bike rack Set screws secure adapter to shank Raised tab prevents the adapter from sliding too far into your hitch receiver Elongated hitch pin hole works with Hollywood Rack's anti-wobble system Also works on racks with a standard hitch pin hole Black powder coat finish resist corrosion Specs: Dimensions: 6-7/8" long x 3-1/4" wide x 2-3/4" tall Hitch pin hole dimensions: 3-1/2" long x 14/16" tall Note: Not for use with 1-1/4" bike racks that use a 2" adapter Avoid the nuisance of having an adapter slide all the way into your receiver. The raised tab on this reducer sleeve keeps the adapter in place while you insert your bike into your hitch. Because of the elongated hitch pin hole, the adapter can be used with Hollywood Racks' anti-wobble system found on the HR1400 and HR1450 series of racks.
This reducer sleeve lets you use 2-1/2" towing and hitch-mounted accessories with your 3" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. ...
Filters
