Even a tilting bike rack can leave your bikes blocking your hatch. This hitch extender swings your entire bike rack or cargo carrier to the driver side, giving you room to open the back and grab what you need without unloading your bikes or gear.The panel holds up to 50 lbs of gear, and the spare tire adapter supports up to 100 lbs. Both loads count toward the Pivot XD's total capacity. Specs Hitch Setup: Receiver size: 2" Minimum hitch class: Class III Compatibility and Capacity: Non-Kuat platform bike racks and cargo carriers up to 28": 350 lbs maximum combined weight Non-Kuat platform bike racks and cargo carriers over 28" and up to 40": 250 lbs maximum combined weight Bike rack or cargo carrier length: 40" maximum, measured from its hitch-pin hole to its farthest point Kuat bike racks: up to 3 bikes, 250 lbs maximum Vertical hanging racks: up to 4 bikes, 150 lbs maximum combined bike weight, excluding the rack weight Off-road load capacity: 250 lbs maximum Kuat bike racks: not approved for off-road use on the Pivot XD Construction and Weight: Material and finish: steel with Sandy Black powder coat Pivot and latch: conical ball-bearing pivot, forged latch with safety pin Product weight: 68 lbs Warranty: Limited lifetime Notes: Do not use with hitch extenders, reducers, or adapters, including 1-1/4" accessories adapted to 2" Check with the manufacturer of your bike rack or cargo carrier to confirm approval for use with a hitch extension Follow the lowest weight rating among your vehicle, your hitch, the Pivot XD, and your bike rack or cargo carrier
This hitch extender converts your existing Kuat bike rack into a swing-away rack. It rotates out 90 degrees or 120 degrees on your passenger's side for quick and easy access to the rear of your vehicle. ... Features: Pivoting hitch extender lets you swing your Kuat bike rack 90 degrees or 120 degrees away from the rear of your vehicle Swings away from passenger's side for easy access to hatch or tailgate area Works with Kuat NV 2.0, NV Base 2.0, Sherpa 2.0 and Transfer bike racks for 2" hitches Toggle clamp lets you quickly release latch so arm can swing out Pull safety lever to swing arm out 90 degrees Pull safety lever again to release or to pivot arm out to 120 degrees Tool-free installation in your hitch with hand-tightening cam system Turn cam knob to tighten extender in hitch and help eliminate rattle in the connection Bike rack installs into Pivot and secures with bike rack's hitch pin Included locking hitch pin secures extender to vehicle Durable, black powder coated steel resists corrosion Specs: Application: 2" x 2" trailer hitch receivers Bike rack capacity: up to 4 bikes Weight capacity: 250 lbs Distance from center of hitch pin hole to: Rack pin hole: 12-3/16" Closest edge of carrier when folded: 5-3/16" Farthest edge of carrier when folded: 14-1/8" Farthest edge of carrier when unfolded: 42-9/16" Top of handle: 8-1/8" Shank rise: 3" Weight: 46 lbs Limited lifetime warranty Notes: The Pivot is only compatible with Kuat bike racks that have 2" shanks Not for use with hitch adapters, reducers, or extenders Using this hitch extender will reduce your hitch's overall capacity by 50 percent
Even a tilting bike rack can leave your bikes blocking your hatch. This hitch extender swings your entire bike rack or cargo carrier to the passenger side, giving you room to open the back and grab what you need without unloading your bikes or gear.The panel holds up to 50 lbs of gear, and the spare tire adapter supports up to 100 lbs. Both loads count toward the Pivot XD's total capacity. Specs Hitch Setup: Receiver size: 2" Minimum hitch class: Class III Compatibility and Capacity: Non-Kuat platform bike racks and cargo carriers up to 28": 350 lbs maximum combined weight Non-Kuat platform bike racks and cargo carriers over 28" and up to 40": 250 lbs maximum combined weight Bike rack or cargo carrier length: 40" maximum, measured from its hitch-pin hole to its farthest point Kuat bike racks: up to 3 bikes, 250 lbs maximum Vertical hanging racks: up to 4 bikes, 150 lbs maximum combined bike weight, excluding the rack weight Off-road load capacity: 250 lbs maximum Kuat bike racks: not approved for off-road use on the Pivot XD Construction and Weight: Material and finish: steel with Sandy Black powder coat Pivot and latch: conical ball-bearing pivot, forged latch with safety pin Product weight: 68 lbs Warranty: Limited lifetime Notes: Do not use with hitch extenders, reducers, or adapters, including 1-1/4" accessories adapted to 2" Check with the manufacturer of your bike rack or cargo carrier to confirm approval for use with a hitch extension Follow the lowest weight rating among your vehicle, your hitch, the Pivot XD, and your bike rack or cargo carrier
When your bike rack blocks the rear hatch, this swing-away adapter moves the load to the passenger's side so you can still reach your gear. Its sealed ball bearing pivot supports up to 250 lbs and keeps the rack swinging smoothly at stops.The Pivot v3 uses Kuat's patented Flatlock Hitch Cam to tighten the connection at your receiver and reduce rattle between hitch components.
When your bike rack blocks the rear hatch, this swing-away adapter moves the load to the driver's side so you can reach your gear. Sealed ball bearing pivot supports up to 250 lbs and keeps the rack swinging smoothly.The Pivot v3 uses Kuat's patented Flatlock Hitch Cam to tighten the connection at your receiver and reduce rattle between hitch components.
Replaces the safety pin and cotter for your KuatPivot V3 or XD Bike Rack (PV3P20B, PV3D20B, or PXDP20B). Provides better pin clearance when used with oversized tires or truck tailgates.Features: Replaces the safety pin and cotter for your KuatPivot V3 or XD Bike Rack Works with PV3P20B, PV3D20B, or PXDP20B Provides better pin clearance when used with oversized tires or truck tailgates Ideal for vehicles like the Ford Bronco, Jeep Wrangler, or Ford Maverick Use with the cotter pin on top and simply pull to remove Fits: KuatPivot V3 or XD Bike Racks: PV3P20B, PV3D20B, and PXDP20B
This 3-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames, has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage, and the U-shaped design makes it easy to load.To adjust the pitch, use the included Allen key to flip the bolt locator tabs upside down. Pivoting Rear-Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
This heavy-duty, 2-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames and has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage.To adjust the pitch, use the included Allen key to flip the bolt locator tabs upside down. Pivoting Rear-Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
This 2-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames, has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage, and the U-shaped design makes it easy to load.To adjust the pitch, use the included Allen key to flip the bolt locator tabs upside down. Pivoting Rear-Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
This 4-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames, has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage, and the U-shaped design makes it easy to load.To adjust the pitch, use the included Allen key to flip the bolt locator tabs upside down. Pivoting Rear-Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
This lightweight, 1-bike rack is perfect for the serious cyclist as well as the occasional rider. It's safe for a carbon frame, and the foot pedal lets you use both hands to tilt the rack for trunk access and fold it up for storage.To adjust the pitch, use the included Allen key to flip the bolt locator tab upside down. Pivoting Rear-Wheel Cradle The rear wheel cradle accommodates a wide variety of bike wheelbases. It pivots front to back, adjusting automatically to your bike's wheelbase - no need for sliding and tightening.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This premium 2-bike rack is perfect for the serious cyclist who cares as much about style as performance. It's safe for carbon frames and the front-mounted foot pedal makes it easy to access your cargo area without removing your bikes.You can also use the straps to secure the cradles flat so they don't flop around when the rack is in the stored position. Pivoting Rear-Wheel Cradles with Ratcheting Straps The pivoting rear-wheel cradles self-adjust to accommodate your bike's wheelbase. Set your bike's rear wheel into the cradle and it will automatically adjust to grip your wheel at the optimal angle.
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system and included tool Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack 1-Bike or 2-bike add-on (sold separately) lets you carry 3 or 4 bikes Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Black powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 67 lbs per bike When used on an RV: 42 lbs Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when folded down: 10-1/8" Closest part of rack when folded up: 6-3/8" Farthest part of rack when folded down: 29-3/8" Farthest part of rack when folded up: 15" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Integrated LED brake lights and turn signals increase safety and visibility 4-Way flat trailer plug connects to your vehicle's 4-way connector Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack 1-Bike or 2-bike add-on (sold separately) lets you carry 3 or 4 bikes Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Gray powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 67 lbs per bike When used on an RV: 42 lbs Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when folded down: 10-1/8" Closest part of rack when folded up: 6-3/8" Farthest part of rack when folded down: 29-3/8" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro X has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.A single bike add-on (sold separately) lets you convert the rack into a 3-bike carrier. Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro X has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.A single bike add-on (sold separately) lets you convert the rack into a 3-bike carrier. Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.A 2-bike add-on (sold separately) lets you convert the rack into a 4-bike carrier. Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.A 2-bike add-on is also available, if you want to convert the rack into a 4-bike carrier. Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro X has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system and included tool Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Black powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 60 lbs per bike Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when folded down: 11" Closest part of rack when folded up: 6" Farthest part of rack when folded down: 28" Farthest part of rack when folded up: 15" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Filters
