When your 48V system won't reliably run 12V equipment, this DC to DC converter steps input down to a 12.2V nominal output. Its wide input range handles voltage swings, so 12V loads stay powered instead of flickering or shutting down.You can run more equipment without overloading a smaller converter. Remote Control Integration Without High Current SwitchingSwitching higher current DC circuits usually requires routing heavy wiring through a manual switch. The remote on and off terminal uses a low power signal or engine run input to control operation.
When your 12V electronics cut out from voltage spikes or drops, this DC to DC converter delivers a regulated 12.2V nominal output. Its isolated design keeps power cleaner, so sensitive loads stay on instead of glitching or shutting down.Designed for DC Loads Not Battery Charging: Adjustable 10V to 15V output supports electronics without improper charging. Full Isolation Between Input and Output: Separate grounds reduce noise and prevent cross-system interference. Scalable Output With Parallel Operation: Combine unlimited units to increase total output beyond 9 amps.
When your 12V electronics cut out from voltage swings, this DC to DC converter delivers a regulated 12.2V nominal output. Its isolated design keeps power stable, so sensitive loads stay on instead of glitching or shutting down.Designed for DC Loads Not Battery Charging: Adjustable 10V to 15V output supports electronics without improper charging. Full Isolation Between Input and Output: Separate grounds reduce noise and prevent cross-system interference. Higher 18 Amp Output for Moderate Loads: Supports more devices than lower amp units without stepping to larger systems.
When your 12V source keeps dropping a 24V device offline, this DC to DC converter steps input up to a 24.2V nominal output. Its isolated design keeps power cleaner, so sensitive electronics stay on instead of resetting or cutting out.Designed for DC Loads Not Battery Charging: Provides regulated DC output for 24V equipment without charge management. Full Isolation Between Input and Output: Separate grounds reduce noise and prevent cross-system interference. Compact 5 Amp Output for Light Loads: Supports electronics and control circuits without oversizing the system.
When your 48V equipment drops out from voltage swings, this DC to DC converter delivers a regulated 48.2V nominal output. Its adjustable output range lets you fine-tune voltage, so connected loads stay stable instead of fluctuating or shutting down.Designed for DC Loads Not Battery Charging: Adjustable 40V to 60V output supports equipment without improper charging. Full Isolation Between Input and Output: Separate grounds reduce noise and prevent cross-system interference. Adjustable Output for Precision Voltage Tuning: Fine-tune output within 40V to 60V to match load requirements.
Prevent power drain in your boat or RV when you're not using it by isolating the battery with this battery disconnect switch. On/off positions for easy operation. Recessed or surface mount. Remove panels to route wires in any direction. 48V.Features: Disconnect switch safely isolates the battery in your boat or RV to prevent power drain ON and OFF positions for easy use Customizable installation - can be recessed or surface mounted Low-profile design when recessed mounted Removable panels allow routing of wires from any direction Connects to either positive or negative wiring Bottom cover insulates the bottom of the switch ABS plastic is UV resistant and long-lasting Specs: Overall dimensions: 2-7/8" long x 2-7/8" wide x 2-15/16" tall Maximum power draw at 48V DC: 900 amps Continuous duty: 300 amps Intermittent duty: 500 amps 4-Year limited warranty
Prevent power drain in your boat or RV when you're not using it by safely isolating the battery with this battery disconnect switch. On/off positions for easy operation. Surface-mount installation. Removable key deters theft of your boat or RV.Features: Safely isolates the battery in your boat or RV to prevent power drain Deters theft - key is removable so you're the only one who can start the battery Toggles between ON and OFF for easy use Installs easily on the surface of your console or on the wall of a compartment in your RV Connects to either positive or negative wiring Provides maximum conductivity with corrosion-resistant, tin-plated copper studs Includes dust cover to use when key is removed Constructed of sturdy, durable plastic Specs: Overall height: 3-1/4" Above mounting plate: 2" Below mounting plate: 1-1/4" Mounting hole spacing (center to center): 1-1/2" Terminal stud size: 5/16" Maximum power draw at 50V DC: 1,250 amps Continuous duty: 275 amps Intermittent duty: 450 amps 4-Year limited warranty
Plastic case with lid protects this switch from dust and water. Removable key deters theft. Switch prevents power drain in your boat or RV when you're not using it. On/off position for easy operation.Features: Safely isolates the battery in your boat or RV to prevent power drain Deters theft - key is removable so you're the only one who can start the battery Toggles between ON and OFF for easy use Offers a low-profile look by mounting recessed into your dash or console Connects to either positive or negative wiring Constructed of ABS plastic that is UV resistant and long-lasting Specs: Overall height: 4" Height above the surface: 3/8" Lid dimensions: 3-7/8" wide x 4" long Required cutout diameter 3" Mounting hole pattern (center to center): 2-5/8" Mounting hole size: 1/4" Terminal stud size: 3/8" Voltage: 50 volts DC Maximum power draw: 1,250 amps Continuous duty: 275 amps Intermittent duty: 450 amps 4-Year limited warranty
Help to prevent corrosion in your aluminum truck bed with this isolation hardware kit. The hardware can be paired with C56000 and C56070 7-way connectors. Includes 4 stainless steel bolts with 4 black rubber well nuts.Features: Isolation kit helps prevent galvanic corrosion in your aluminum truck bed Rubber well nuts separate the included stainless steel bolts from the aluminum bed Kit includes 4 stainless steel bolts and 4 rubber well nuts
Smart converter charger extends RV battery life by fighting sulfation during storage. Multistage charging process switches modes to ensure a quick, complete charge. Converts AC shore power to DC power to run 12V loads out on the water.Features: Converter charger changes AC shore power to DC power to quickly charge your boat's batteries Provides continuous power to your DC breaker panel to run 12V loads Works with flooded lead acid, AGM, and gel batteries 3 Diode isolated outputs lets you charge 3 separate banks of batteries Four-stage charging system monitors your boat's batteries and automatically begins charging when needed Provides rapid recharge and helps extend battery life Intelligent cooling fan reduces thermal stress by maintaining a constant operating temperature Built-in safety features protect your boat's electrical system Status remote pendant lets you manually select the charging mode UL listed Made in the USA Specs: Application: 12V battery systems Rated power output: 1,300 watts Amperage output: 80 amps Voltage: Input: 105 - 130 VAC Output: 13.9 VDC Temperature ranges: Operating range: 32 F to 122 F Storage range: -4 F to 176 F Cable length: 30" Dimensions: 10-15/16" long x 7-13/16" wide x 4-3/16" deep Weight: 6.5 lbs 2-Year limited warranty
Fuse kit contains 2 high-quality, 100-amp MIDI fuses with protective holders. Designed for use with a Redarc 100-amp Smart Start battery isolator. Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc 100-amp Smart Start battery isolators (331-SBI12, 331-SBI12D, 331-SBI12KIT, 331-SBI24, 331-SBI24D) Also great for use with powered winch setups Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (2) 100-Amp fuses 2 Fuse holders with hardware 4 Cable crimp lugs 2-Year warranty
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off 12V switch for controlling lights and other applications powered by your battery Switch is illuminated by an incandescent bulb when it is in the "on" position Black plate with blue switch UL/CSA/VDE/RoHS approved Made in the USA Specs: Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 3/4" tall x 9/16" wide x 3/8" deep SPST Electrical current ratings: 10 amps at 125V AC 6 amps at 250V AC 15 amps at 12V DC
Single on/off 12V switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off 12V switch for controlling lights and other applications powered by your battery Switch is illuminated by an incandescent bulb when it is in the "on" position Black plate with red switch UL/CSA/VDE/RoHS approved Made in the USA Specs: Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/4" tall x 3/4" wide x 3/8" deep SPST Electrical current ratings: 16 amps at 125V AC 3/4 hp at 125V - 250V AC 12 amps at 250V AC 10 amps at 14V DC
Single on/off 120V switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off 120V switch for controlling applications powered by your shore power Switch illuminates when it is in the "on" position SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC UL/CSA/VDE/RoHS approved Black plate with red switch Made in the USA Specs: Switch faceplate dimensions: 1-1/4" tall x 11/16" wide Required cutout dimensions: 1-1/8" tall x 9/16" wide
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off 12V switch for controlling lights and other applications powered by your battery Switch is illuminated by an incandescent bulb when it is in the "on" position Black plate with amber switch UL/CSA/VDE/RoHS approved Made in the USA Specs: Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/4" tall x 3/4" wide x 3/8" deep SPST Electrical current ratings: 16 amps at 125V AC 3/4 hp at 125V - 250V AC 12 amps at 250V AC 10 amps at 14V DC
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off switch for controlling lights and other applications powered by your battery Switch illuminates when it is in the "on" position SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/4" tall x 3/4" wide x 3/8" deep UL/CSA/VDE/RoHS approved Black plate with green switch Made in the USA
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off switch for controlling lights and other applications powered by your battery Switch illuminates when it is in the "on" position SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/4" tall x 3/4" wide x 3/8" deep UL/CSA/VDE/RoHS approved Ivory plate with amber switch Made in the USA
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off switch for controlling lights and other applications powered by your battery Switch illuminates when it is in the "on" position SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/8" tall x 1/2" wide UL/CSA/VDE/RoHS approved White plate with red switch Made in the USA
Need a switch you can see at a glance? This illuminated rocker switch makes it easy to tell when power is on, while giving you simple on and off control for everyday functions. ... Features: Rocker switch designed for illuminated on/off control of electrical components Built-in illumination helps indicate when the switch is powered on SPST configuration supports simple single-circuit operation Typical use with lighting, water heaters, water pumps, and similar appliances White switch with red illumination for clear visibility 3 Terminal design for proper electrical connections 14 VDC rating for compatible systems Includes 1 rocker switch Made in the USA Specs: Configuration: SPST Voltage: 14 VDC Current rating: 10 amps Terminals: 3 Cutout dimensions: 9/16" x 1-1/8"
Need a switch thats easy to see and built for higher power? This illuminated rocker switch makes it simple to control your setup while clearly showing when it's on. ... Features: Rocker switch designed for illuminated on/off control of electrical components Built-in illumination helps indicate when the switch is powered on SPST configuration supports simple single-circuit operation Typical use with lighting, water heaters, water pumps, and similar appliances Black switch with red illumination for clear visibility 3 Terminal design for proper electrical connections 14 VDC rating for compatible systems Includes 1 rocker switch Made in the USA Specs: Configuration: SPST Voltage: 14 VDC Current rating: 20 A Terminals: 3 Cutout dimensions: 1/2" x 3/4" to 25/32"
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. ... Features: Single on/off switch for controlling lights and other applications powered by your battery Switch illuminates when it is in the "on" position SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC Cutout dimensions: 1-1/8" tall x 9/16" wide Switch dimensions: 1-1/4" tall x 3/4" wide x 3/8" deep UL/CSA/VDE/RoHS approved Brown plate with amber switch Made in the USA
Need a switch you can see at a glance? This illuminated rocker switch makes it easy to tell when power is on, while giving you simple on and off control for everyday functions. ... Features: Rocker switch designed for illuminated on/off control of electrical components Built-in illumination helps indicate when the switch is powered on SPST configuration supports simple single-circuit operation Typical use with lighting, water heaters, water pumps, and similar appliances Black switch with red illumination for clear visibility 3 Terminal design for proper electrical connections 125 VAC rating for compatible systems Includes 1 rocker switch Made in the USA Specs: Configuration: SPST Voltage: 125 VAC Terminals: 3 Cutout dimensions: 9/16" x 1-1/8"
Need a switch you can see at a glance? This illuminated rocker switch makes it easy to tell when power is on, while giving you simple on and off control for everyday functions. ... Features: Rocker switch designed for illuminated on/off control of electrical components Built-in illumination helps indicate when the switch is powered on SPST configuration supports simple single-circuit operation Typical use with lighting, water heaters, water pumps, and similar appliances Black switch with red illumination for clear visibility 3 Terminal design for proper electrical connections 14 VDC rating for compatible systems Includes 1 rocker switch Made in the USA Specs: Configuration: SPST Voltage: 14 VDC Current rating: 10 amps Terminals: 3 Cutout dimensions: 9/16" x 1-1/8"
Avoid damage to your towed car by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.Hold until the LED starts flickering. Once it stops flickering, the switch should be good to go.
Filters
