Mount foglights to your ATV, side-by-side, or bike with these premium 2" lights. The SAE-compliant foglights give you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglights give you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Street-legal pods are SAE J583 certified for use on all roadways Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Adjustable brackets let you mount your lights vertically or horizontally - just rotate the lenses 90 degrees DT-type Deutsch connectors come with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housings are waterproof Cool white color matches most factory LED lights Specs: Quantity: 2 lightsLight dimensions: 2" wide x 2" tall x 2-3/8" deep Height to the bottom of the bracket: 2-5/8" Weight (each): 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 6,000 candela Illuminance: 57 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 6000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Mount foglights to your ATV, side-by-side, or bike with these premium 2" lights. The SAE-compliant foglights give you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglights give you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Street-legal pods are SAE J583 certified for use on all roadways Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Adjustable brackets let you mount your lights vertically or horizontally - just rotate the lenses 90 degrees DT-type Deutsch connectors come with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housings are waterproof Yellow lenses improve sight lines in bad weather like rain and fog Specs: Quantity: 2 lightsLight dimensions: 2" wide x 2" tall x 2-3/8" deep Height to the bottom of the bracket: 2-5/8" Weight (each): 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 4,200 candela Illuminance: 38 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 3000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Customize your rig with these premium 2" lights that mount flush to give the lights a factory appearance. The SAE-compliant foglights give you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglights give you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Street-legal pods are SAE J583 certified for use on all roadways Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Flush mounts give the lights a factory look DT-type Deutsch connectors come with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housings are waterproof Cool white color matches most factory LED lights Specs: Quantity: 2 lights Dimensions: 3" wide x 2-5/16" tall x 2-3/8" deep Weight (each): 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 6,000 candela Illuminance: 57 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 6000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Customize your rig with these premium 2" lights that mount flush to give the lights a factory appearance. The SAE-compliant foglights give you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglights give you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Street-legal pods are SAE J583 certified for use on all roadways Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Flush mounts give the lights a factory look DT-type Deutsch connectors come with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housings are waterproof Yellow lenses improve sight lines in bad weather like rain and fog Specs: Quantity: 2 lights Dimensions: 3" wide x 2-5/16" tall x 2-3/8" deep Weight (each): 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 4,200 candela Illuminance: 38 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 3000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Mount a foglight to your ATV, side-by-side, or bike with this premium 2" light. The SAE-compliant foglight gives you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglight gives you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optic reduces glare and gives you a more concentrated beam pattern that projects light further Street-legal pod is SAE J583 certified for use on all roadways Amber backlight acts as a running light making you extra visible to other motorists when not using your foglights Adjustable bracket lets you mount your light vertically or horizontally - just rotate the lens 90 degrees DT-type Deutsch connector comes with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Yellow lens improves sight lines in bad weather like rain and fog Specs: Quantity: 1 lightLight dimensions: 2" wide x 2" tall x 2-3/8" deep Height to the bottom of the bracket: 2-5/8" Weight: 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 4,200 candela Illuminance: 38 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 3000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Customize your rig with this premium 2" light that mounts flush to give the light a factory appearance. The SAE-compliant foglight gives you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglight gives you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optic reduces glare and gives you a more concentrated beam pattern that projects light further Street-legal pod is SAE J583 certified for use on all roadways Amber backlight acts as a running light making you extra visible to other motorists when not using your foglights Flush mount gives the light a factory look DT-type Deutsch connector comes with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Yellow lens improves sight lines in bad weather like rain and fog Specs: Quantity: 1 light Dimensions: 3" wide x 2-5/16" tall x 2-3/8" deep Weight: 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 4,200 candela Illuminance: 38 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 3000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Hello Ray, Thanks for writing in, happy to get you a complete flat tow set-up for your 2016 Dodge Dart. - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #RM-52294-1 - because this is a crossbar-style base plate you will…
To determine the correct replacement speakers for your trailer you'll need to remove one from the wall and measure the cutout hole. From there we would just pick out speakers that match the cutout hole so that you don't need to make any…
Yes, you can upgrade from a 13,500 Btu model to a 15,000 Btu like the Advent Air Replacement RV Air Conditioner for Dometic Setup part #ACDOM150 which will use the existing connections therefore you can retain the digital thermostat. In regards to…
To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…
Hey Tom, thanks for reaching out. Yes you are on the right track. The Ducted Air Distribution Box #LC64DX (2024040312) will indeed work with the Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump #FR24TQ (2025008216). They are made…
Since the sewer systems on trailers and motorhomes are the same you can use the RhinoFLEX Rhino Blaster Pro Adapter #CAM39085 for both applications. It installs easily without tools but you can use the RhinoFLEX Swivel Fitting Wrench Set #CAM39758 to…
Installing the gears is fairly easy, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin that will need to be removed. You can then remove the handle, square block and gear. You can then…
All A-Frame mounted jacks like etrailer #TJA-2000S-B will use the same 3-inch mounting hole bolt pattern. This means, the mounting holes are a universal size and pattern so that any A-Frame jack will fit into any A-Frame jack mount as long as your…
The 3 bolt holes of the Bulldog #BD155157 Jack are 3-1/4 inches apart on center. If you refer to the photo I edited for you, can can see all of the mounting plate dimensions.
The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…
If you will be using the trailer hitch for an accessory such as a bike rack or cargo carrier than I recommend the etrailer hitch #e72TR because it does not have the stabilization strap requirement for non-trailer loads like the Curt, #C13281. It also…
We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…
Customize your rig with this premium 2" light that mounts flush to give the light a factory appearance. The SAE-compliant foglight gives you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglight gives you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optic reduces glare and gives you a more concentrated beam pattern that projects light further Street-legal pod is SAE J583 certified for use on all roadways Amber backlight acts as a running light making you extra visible to other motorists when not using your foglights Flush mount gives the light a factory look DT-type Deutsch connector comes with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Cool white color matches most factory LED lights Specs: Quantity: 1 light Dimensions: 3" wide x 2-5/16" tall x 2-3/8" deep Weight: 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 6,000 candela Illuminance: 57 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 6000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Mount a foglight to your ATV, side-by-side, or bike with this premium 2" light. The SAE-compliant foglight gives you a brighter, concentrated light pattern to see more clearly in inclement weather.Features: LED foglight gives you high intensity light in an 98-degree horizontal spread for better visibility in inclement weather TIR optic reduces glare and gives you a more concentrated beam pattern that projects light further Street-legal pod is SAE J583 certified for use on all roadways Amber backlight acts as a running light making you extra visible to other motorists when not using your foglights Adjustable bracket lets you mount your light vertically or horizontally - just rotate the lens 90 degrees DT-type Deutsch connector comes with bare leads for installation Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Cool white color matches most factory LED lights Specs: Quantity: 1 lightLight dimensions: 2" wide x 2" tall x 2-3/8" deep Height to the bottom of the bracket: 2-5/8" Weight: 0.34 lbs Operating voltage: 9-16V Wattage: Main beam: 19.2 watts Backlight: 0.3 watts Power draw: Main beam: 1.5 amps Backlight: 25 mA Raw lumens: 1,980 Peak beam intensity: 6,000 candela Illuminance: 57 lux @ 10 meters Beam angle: 98 degrees wide x 9 degrees vertical Color temperature: 6000 K IP rating: IP67 Operating temperature: -40 F to 185 F 8-Year limited warranty Note: When installed as a pair and aimed in accordance with your state's regulations, fog pattern meets SAE J583 standard as a fog lamp, for legal on-road use.
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-3/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 2,262 Measured: 1,520 Peak beam intensity: 10,600 candela Illuminance: 106 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 11,900 candela Illuminance: 119 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 18,000 candela Illuminance: 180 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 12,500 candela Illuminance: 125 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 2,262 Measured: 1,520 Peak beam intensity: 10,600 candela Illuminance: 106 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 12,500 candela Illuminance: 125 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 12,500 candela Illuminance: 125 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 2,262 Measured: 1,520 Peak beam intensity: 10,600 candela Illuminance: 106 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 18,000 candela Illuminance: 180 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 11,900 candela Illuminance: 119 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 1,930 Measured: 1,300 Peak beam intensity: 9,050 candela Illuminance: 91 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 1,930 Measured: 1,300 Peak beam intensity: 9,050 candela Illuminance: 91 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED foglights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your foglights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Filters
