This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the smoke amber/red lens puts both colors in one compact light.Bracket Included: Black mounting bracket comes with the light for installation on your fender. Features to know about One Light Works on Either Fender Replacing a fender light doesn't require tracking down separate driver- and passenger-side versions.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Use this small edge rubber trim around your enclosed trailer's stone guard or to cover sharp aluminum edges. Can be used inside or outside of the trailer.Features: This small edge rubber trim covers sharp aluminum edges on your enclosed trailer or around your trailer's stone guard Can be used inside or outside of the trailer Rubber construction is durable and flexible Dimensions: 25' long x 3/4" x 1/2" Made in the USA
Exposed edges on trailers and cabinets can wear down or leave sharp edges that catch on gear or hands. This aluminum nosing trim covers those edges to protect them and create a smooth, finished edge.To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim or edge and compare: Overall length (this trim is 93-1/2") Overall height (this trim is 1-1/16") Material thickness (this trim is 3/16") Profile shape — how the trim is formed and how it sits against the edge The shape matters just as much as the dimensions.
Replace broken or worn-out edgetrimming on your RV to give you a finished look and protect exposed edges. This edgetrim installs onto a 1/2" thick flange. Flexible core keeps trim in place on rounded corners.Features: Push-on U-channel edgetrim replaces edgetrimming or replaces trim on your rear cargo door on your RV Flexible core helps trim piece maintain its grip in rounded areas Completely encased in extruded PVC to prevent rust formation Easy installation - Press onto a 1/2" thick flange Use scissors to remove excess trim May have to use a rubber mallet to tap in trim Black, textured PVC construction Dimensions: 50' long x 3/4" wide x 1" tall Made in the USA
This edgetrim covers and protects unfinished or sharp edges around cabinets or your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. ... Features: Nosing (or edgetrim) covers and protects unfinished edges on your enclosed trailer Can be used on cabinets or on your trailer's stone guard Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 1" tall x 3/16" deep Made in the USA
Apply this flexible edgetrim around your RV to prevent leaks, gaps, and vibration. Adhesive backing is pre-applied for an easy DIY install.Features: Flexible edgetrim prevents leaks, gaps, and vibration around your RV Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal Skirting around recessed adhesive protects connection from the elements EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 10' long x 9/16" wide x 1-1/2" tall Made in the USA
Exposed edges on trailers and cabinets can chip, wear down, or leave a rough finish if they're not covered. This nosing trim covers those raw edges to protect them from damage and create a finished look along panels, doors, or stone guards.To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim and compare: Overall length (this trim is 93-1/2") Overall height (this trim is 1-5/16") Material thickness (this trim is 3/16") Profile shape — how the trim is formed and how it sits against the edge The shape matters just as much as the dimensions.
This 93-1/2" long section of edgetrim covers and protects unfinished or sharp edges around cabinets or your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. ... Features: Nosing (or edgetrim) covers and protects unfinished edges on your enclosed trailer Can be used on cabinets or on your trailer's stone guard Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 1-1/4" tall x 3/16" deep Made in the USA
This bottom rail trim covers and protects unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. Aluminum construction is sturdy and rustproof. ... Features: Flat rub rail trim covers unfinished edges along the bottom of your enclosed trailer Can also be used on your trailer's stone guard Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Aluminum construction is sturdy and rustproof Trim can be cut to fit your specific application Dimensions: 93-1/2" long x 3" tall x 1/2" deep Made in the USA
Lower trailer edges are exposed to road debris, water, and constant wear that can damage panels over time. This flat aluminum rub rail trim covers exposed edges to protect them and help keep water from getting behind the panel.Customizable: You can cut it to fit your specific project. Features to know about Matching Your Existing Trim If you're replacing worn trim along the bottom edge or repairing a stone guard, getting the right fit matters. Flat rub rail means the trim has a single flat profile with no angle, offset, or formed edge.
This 93-1/2" long section of rounded J-channel trim covers unfinished or sharp edges around your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.Features: Rounded J-channel trim covers the cut edges on your enclosed trailer Can be used on your trailer's stone guard or as trim on exterior siding Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 7/8" tall x 1/4" deep Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. ... Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 3/4" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 25' long x 7/8" wide x 3/8" tall Made in the USA
Lower trailer edges take on road spray, debris, and water that can wear down panels or seep behind seams. This uneven aluminum rub rail trim covers exposed edges to protect them and help keep water from getting behind the panel.Measure each side of the profile from the mounting surface to the outer edge to confirm both dimensions match your existing trim. This rub rail trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim caps the edge to protect it from damage and help keep moisture out of the wood.If the profile doesn't match, the trim may not sit flush or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Exposed edges along the top and bottom of your trailer can wear down or let water reach the panel over time. This aluminum top rail trim covers raw edges to protect them and help reduce moisture exposure.If the profile doesn't match, the trim may not sit properly or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim covers the edge to protect it and create a clean, finished corner.If the profile doesn't match, the trim may not sit flush or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Exposed edges along the top and bottom of your trailer can wear down or let water reach the panel over time. This aluminum top rail trim covers raw edges to protect them and help reduce moisture exposure.If the profile doesn't match, the trim may not sit properly or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim caps the edge to protect it from damage and help keep moisture out of the wood.If the profile doesn't match, the trim may not sit flush or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or look unfinished over time. This aluminum angle trim covers those edges to protect them from damage and create a clean, finished corner.If the profile doesn't match, the trim may not sit flush against the edge. Even small differences can prevent the new piece from lining up with your existing trim. If you're not sure, take a few measurements and photos of your current setup and reach out to etrailer support for help comparing options.
Lower trailer edges are exposed to road debris, water, and constant wear that can damage panels over time. This aluminum bottom rail trim covers exposed edges to protect them and help shield the panel from impact.If the profile doesn't match, the trim may not sit properly or protect the edge. Even small differences can prevent the new piece from lining up with your existing trim.
Finish the lower edges on your trailer or stone guard with this aluminum rub rail trim. It covers exposed edges to reduce wear and helps keep water from getting behind the panel.If the profile doesn't match, the trim may not sit flush or fully cover the edge. Even small differences can prevent the new piece from lining up with your existing trim.
This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. ... Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can be used on the edge of your wooden ramp door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 3/4" tall x 3/4" deep x 0.05" thick Made in the USA
The trim on your RV roof edge, RV trim molding, or truck bed camper shell can become cracked and stained. Replace it with this black insert. ... Features: Black insert replaces cracked or stained trim on your RV's aluminum roof edge or trim molding or on a truck bed camper shell Durable vinyl with UV inhibitors provides long-lasting protection against the sun Easy installation - trim slides into existing metal track Specs: Dimensions: 100' long x 3/4" wide 1-Year limited warranty Note: Not for windows, entry doors, compartment doors, or vents. 25272 Camco Motor Home Vinyl Insert for Trim Molding - Black - 100 Feet Long x 3/4 Inch Wide
Filters
