Designed for motorcycle and dirt bike tires that are 2" to 6" wide, this chock clips right into the E-track in your trailer. Position the chock at 45 degrees to the left or right, or at 90 degrees - whatever works best for your setup.Features: Easy to Mount: Chock snaps into the E-track already installed in your trailer Works best when clipped in around 14-1/2" from the floor Load Multiple Motorcycles: Angle chock at 45 degrees to the left or right, or 90 degrees - add more chocks so you can fit multiple bikes into a small space Great for Dirt Bikes: Chock fits bike tires 2" to 6" wide, covering dirt bikes and smaller motorcycles Made in the USA
Trailer E-Track can be mounted horizontally on the wall or on the floor. Screws, rivets or welding can be used to install the track. 40" Long Capacity: 6,000 lbs
This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.The roller idler allows you to move the ratchet away from your vehicle so that you can tighten down the strap without crawling under your vehicle. The spring-loaded E-track fittings on the strap ends and the roller idler easily clip into E-track anchor slots (E-track is sold separately). And the zinc-coated steel construction of the roller idler and the ratchet resists rust.
Attach your CargoBuckle retractable tie-down straps to an E-track with these adapter straps. These lightweight straps provide you with a variety of mounting options to safely, effectively secure your cargo. ... Features: Adapts your CargoBuckle ratchet straps for use with E-track tie-down points Makes tie-down straps movable and more versatile Keeps you from having to permanently bolt straps or ratchets to your trailer Spring-loaded release makes unit simple to lock and unlock Makes adapter easy to move between different E-track and Snap-Loc slots Bolts onto CargoBuckle retractor - mounting hardware included Made of durable nylon and sturdy, zinc-plated steel Specs: Application: horizontal or vertical E-track cargo control systems and Snap-Locs Overall length: 7" Strap dimensions: 5" long x 2" wide Maximum load (break strength): 2,500 lbs each Safe working load limit (WLL): 833 lbs Quantity: 2 adapter straps 1-Year limited warranty Note: Tie-down straps should always be chosen according to their safe working load limit (WLL).
This dual-arm hanger is perfect for storing multiple rakes, shovels, or other long-handled tools on your E track. Deep arms slope up to help prevent tools from falling out during transport. Keep your trailer or garage organized.Features: Dual-armed hook lets you hang rakes, shovels, or other long-handled tools on your E track Deep, sloped arms help prevent tools from falling out during transport Spring-loaded fitting lets you easily move hook from one E track slot to another Zinc-plated rolled steel is rust resistant Specs: Application: Fits all E-track systems Weight capacity: NOT load rated 90-day limited warranty
These standard-duty, self-retracting ratchet straps for E-tack or X-track let you secure an appliance, box or other bulky item in your enclosed trailer. Easy to reposition between track slots. 1,500 lbs Max load.
These steel backing plates for (4) 8' E-tracks in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt the plates to your E-tracks on the opposite side of the wall or under the floor.Pre-Drilled Holes Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors. Simple, Bolt-On Installation To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced.
These steel backing plates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Pre-Drilled Holes Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors. Simple, Bolt-On Installation To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced.
These steel backing plates for the 2' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Pre-Drilled Holes Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors. Simple, Bolt-On Installation To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced.
These steel backing plates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Pre-Drilled Holes Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors. Simple, Bolt-On Installation To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced.
This steel backing plate for the E-track or D-ring in your enclosed trailer provides more support than just securing it with wood or metal screws. Bolt the plate to your E-track on the opposite side of the wall or under the floor.Pre-Drilled Holes Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate a D-ring, Snap-Loc, or odd-shaped tie-down anchor. Simple, Bolt-On Installation To install, drill pilot holes in your mounting surface.
This kit lets you install your CargoSmart X-track or E-track to your truck, trailer, van, or garage wall. It includes 8 screws for installing the track on a solid surface and 16 toggle bolts for installing the track on a hollow wall.Features: Hardware kit comes with everything you need to mount your 60" E-track or X-track system (sold separately) 8 Philips head wood screws let you mount to solid surface 16 Toggle bolts let you mount to hollow wall Specs: Screw and bolt dimensions: 3" long x 1/4" diameter Pull-out strength rating: 200 lbs Shear-strength rating: 200 lbs 1-Year limited warranty
Use this Snap-Loc self-tapping screw set to attach e-tracks to a metal surface. Built-in washer head for non-scratch installation. Made from zinc-plated steel.Features: Attaches e-tracks to a metal surface Built-in washer head for non-scratch installation and added holding power Includes 20 heavy-duty, zinc-plated steel screws Specs: Dimensions: 1-1/4" long x 1/4" diameter Break strength: 600 lbs Working load limit: 200 lbs
Use this Snap-Loc screw set to attach e-tracks to a wood surface. Built-in washer head for non-scratch installation. Made from zinc-plated steel.Features: Attaches e-tracks to a wood surface Built-in washer head for non-scratch installation and added holding power Includes 20 zinc-plated steel screws Specs: Dimensions: 1" long x 1/4" diameter Break strength: 600 lbs Working load limit: 200 lbs
These high-strength zinc carriage bolts, fender washers and self-locking Nyloc nuts offer a quick, easy way for 1 person to install 2 square-mounting-hole Snap-Loc single-slot E-track tie-down anchors (sold separately) on wood or metal surfaces.Features: Use to install 2 Snap-Loc E-track tie-down anchors that have square mounting holes Allows one person to quickly and easily mount Snap-Locs on a truck or trailer Won't spin during installation like an Allen bolt would Includes 4 heavy-duty zinc carriage bolts, 4 fender washers and 4 Nyloc self-locking nuts Specs: Dimensions: Carriage bolts: 1" long x 5/16" diameter, coarse Fender washers: 1-1/2" diameter Nyloc nuts: 5/16" diameter
This strap lets you create a custom anchor point for mowers, tillers, and other large equipment. It provides 6" of clearance from the E-track or X-track on the wall or floor of your enclosed trailer. 2,000 lbs Max load.Features: Strap provides an anchor point with 6" of clearance from the wall or floor of your trailer Creates custom anchor point for mowers, tillers, and other large equipment Provides additional length for connecting a short strap Ring provides easy attachment point for ratchet strap with hook Easy installation - just snap spring-loaded fitting into E-track or X-track anchor points Strap can be easily moved from one E-track or X-track slot to another High-visibility orange polyester webbing is strong and resistant to tears Specs: Safe working load limit (WLL): 667 lbs Maximum load (break strength): 2,000 lbs Strap dimensions: 2" wide x 6" long Ring dimensions: 1-3/4" long x 5/16" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Kinedyne's Plastic End CapFeatures: Kinedyne's Plastic End Cap gives a nice finishing touch to the installation of floor mounted E-Track The end cap will prevent feet, cargo, and equipment from catching on the end of the E-track For use with horizontal E-track
This extended flat hook lets you hang multiple rakes, shovels or other long-handled tools from the E-track or X-track in your enclosed trailer or workshop. Dual arms with rubber-dipped ends offer stability for heavy gear.Features: Extended dual-arm tool hook lets you can hang gear inside your enclosed trailer or on your workshop wall Perfect for hanging multiple rakes, shovels, and other long-handled tools Can be used with CargoSmart track bungee or tool stabilizer (sold separately) for extra security Dual arms offer stability for heavy items Easy installation - just snap spring-loaded fitting into E-track or X-track anchor points Hook can be easily moved from one E-track or X-track slot to another Gray powder coated steel construction with rubber-dipped ends is strong and durable Specs: Weight capacity: 200 lbs Dimensions: 7-1/4" deep x 4-5/8" wide x 3-1/4" tall 1-Year limited warranty
This extra-long flat hook with rubber-dipped ends lets you hang multiple straps, bags, and other items from the E-track or X-track in your enclosed trailer or workshop. Easy to reposition between track slots.Features: Flat hook lets you can hang gear inside your enclosed trailer or on your workshop wall Extended length is perfect for hanging multiple cables, straps, bags, tools or other items Use with second hook (sold separately) to hang ladders and other long items Easy installation - just snap spring-loaded fitting into E-track or X-track anchor points Hook can be easily moved from one E-track or X-track slot to another Gray powder coated steel construction with rubber-dipped ends is strong and durable Specs: Weight capacity: 200 lbs Usable length: 6-1/4" Weight: 0.94 lbs 1-Year limited warranty
Filters
