Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9-3/4" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9-3/4" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Replacing a manual or undersized tongue jack? This kit pairs a 5,000 lb electric A-frame jack with a rubber SnapPad for extra lifting capacity, button-operated lifting, and a wider landing surface that stays attached between stops.More Footing at Camp: 7-3/4" rubber SnapPad increases ground contact on grass, gravel, or dirt. Leave the Pad on Between Stops: Snap-on rubber pad stays attached to the compatible 6" round jack foot. Get Extra Reach Without Running the Motor: 4-1/2" drop leg brings the foot closer to the ground.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.
Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Base pad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs Dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Quantity: 1 pad 2-Year warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
Replacing a manual or worn-out tongue jack? This kit pairs a 3,500 lb electric A-frame jack with a rubber SnapPad for button-operated lifting and a wider landing surface that stays attached between stops.More Footing at Camp: 7-3/4" rubber SnapPad increases ground contact on grass, gravel, or dirt. Leave the Pad on Between Stops: Snap-on rubber pad stays attached to the compatible 6" round jack foot. Get Extra Reach Without Running the Motor: 4-1/2" drop leg brings the foot closer to the ground.
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
Add 8,000 lbs of hydraulic lifting capacity to a heavy work trailer with this direct-weld square jack. Its double-acting cylinder provides 20" of powered lift and connects to an external hydraulic power unit through #6 JIC ports.This jack can also be used as part of a tandem landing-gear setup. When two jacks share one hydraulic power unit, a flow divider is strongly recommended to distribute hydraulic flow between the legs and help them operate together more consistently. The jack measures approximately 32-1/2" retracted and 52-1/2" extended, so check the available mounting area and ground clearance before welding it permanently to the trailer.
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 square Stackers and storage bag.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" Square surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Fabric storage bag is included Specs: Overall dimensions: 10" long x 10" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 rectangular Stackers.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" x 20" Rectangular surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Specs: Overall dimensions: 10" long x 20" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 square Stackers.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" Square surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Specs: Overall dimensions: 10" long x 10" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 rectangular Stackers and storage bag.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" x 20" Rectangular surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Fabric storage bag is included Specs: Overall dimensions: 10" long x 20" wide 1-Year warranty
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! These durable jack blocks provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.
This comprehensive leveling kit contains everything you need to stabilize your trailer or RV at home or the campsite. Convenient storage bag included to keep your kit components secure and easy to find when they're not in use.Features: Comprehensive kit contains everything you need to stabilize your trailer or RV Includes 1 base pad peak, 4 base pads, 2 wheel chocks, 2 base pad levelers, 2 anti-slip mats, and a storage bag Base pad peak works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack 5/8" Base pads add height and stability on soft surfaces like hot asphalt or sand Compact levelers help your trailer stay flat Non-skid traction mats go under levelers to limit their movement as you drive up Oversized, heavy-duty rubber wheel chocks keep your trailer from rolling when it's parked and leveled Blue storage bag keeps all kit components secure and easy to find when not in use Made in the USA Specs: Base pad peak: Weight capacity: 3,500 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Base pad dimensions: 9" long x 6" wide x 5/8" thick Chocks: Weight: 4 lbs per chock Dimensions: 7-3/4" long x 5-7/8" wide Levelers: Weight capacity: 30,000 lbs per leveler Dimensions: 11" long x 7" wide x 4-1/4" tall
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.
Filters
