This manifold-backexhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.It includes a lifetime warranty. 15815 MagnaFlow Stainless Steel Manifold-BackExhaust System - Gas
This manifold-backexhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.It includes a lifetime warranty. 15816 MagnaFlow Stainless Steel Manifold-BackExhaust System - Gas
This cat-backexhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 3" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 3" Tips sold separately Dual exhaust system Split rear exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and 1970s.
This cat-backexhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Clamps and hangers are included for installation. It includes a lifetime warranty. 15819 MagnaFlow Manifold-BackExhaust System
This manifold-backexhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Clamps and hangers are included for installation. It includes a lifetime warranty. 16842 MagnaFlow Manifold-BackExhaust System
Front pipes work with a custom-fit crossmember-backexhaust system (MF19303 - sold separately) to boost horsepower and torque and help to improve fuel efficiency for your vehicle. Mandrel-bent tubing allows exhaust to flow freely through your system.This consistency in diameter decreases back pressure (or exhaust turbulence). MagnaFlow's signature sound is deep and throaty on throttle while remaining quiet inside the vehicle .
This crossmember-backexhaust system has mandrel-bent tubing, 2 performance mufflers and a Tru-X-Pipe, which allow exhaust to flow freely through the system, boosting horsepower and torque and thereby improving engine performance and durability.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Each performance muffler has a stainless steel, perforated core that runs directly from one end to the other with a slight bend to reach the offset outlet A layer of stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures and prevent blowouts No baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside your vehicle All materials made with 100-percent stainless steel 2 Polished, turndown tips included, as well as clamps and hardware included for installing onto the OEM exhaust system Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 2-1/2" Muffler dimensions: 5" tall x 8" wide x 14" long Tailpipe diameter: 2-1/2" Number of tips included: 2 Exhaust system: dual Exit position: dual split side Lifetime warranty This crossmember-back system is designed to replace the entire OEM exhaust system from the manifold, or header, back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 3" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 3" Tips sold separately Dual exhaust system Split rear side exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 2-1/2" Tips sold separately Dual exhaust system Split rear exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 3" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 3" Tips sold separately Dual exhaust system Split rear side exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Clamps and hangers are included for installation. It includes a lifetime warranty. 15894 MagnaFlow Crossmember-BackExhaust System
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Each performance muffler has a stainless steel, perforated core that runs directly from one end to the other with a slight bend to reach the offset outlet A layer of stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures and prevent blowouts No baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside your vehicle All materials made with 100-percent stainless steel Clamps and hardware included for installing onto the OEM exhaust system Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 3" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 3" Number of tips included: 0 Exhaust system: dual Exit position: rear Lifetime warranty This crossmember-back system is designed to replace the entire OEM exhaust system from the manifold, or header, back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque, and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Each performance muffler has a stainless steel, perforated core that runs directly from one end to the other with a slight bend to reach the offset outlet A layer of stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures and prevent blowouts No baffles, chambers or louvers that restrict airflow Signature sound is deep and throaty on throttle but quiet inside your vehicle All materials made with 100-percent stainless steel Includes 2 tips, as well as clamps and hardware included for installing onto the OEM exhaust system Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 18" long Tip diameter: 3" Number of tips included: 2 Exhaust system: dual Exit position: split rear Lifetime warranty This crossmember-back system is designed to replace the entire OEM exhaust system from the manifold, or header, back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 2-1/2" Muffler is custom fit according to make and model Tailpipe diameter: 2-1/2" Tips sold separately Dual exhaust system Split rear side exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 2-1/2" Tips sold separately Dual exhaust system Split rear exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Clamps and hangers are included for installation. It includes a lifetime warranty. 15897 MagnaFlow Crossmember-BackExhaust System
This crossmember-backexhaust system has mandrel-bent tubing, 2 performance mufflers and a Tru-X-Pipe, which allow exhaust to flow freely through the system, boosting horsepower and torque and thereby improving engine performance and durability.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Each performance muffler has a stainless steel, perforated core that runs directly from one end to the other with a slight bend to reach the offset outlet A layer of stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures and prevent blowouts No baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside your vehicle All materials made with 100-percent stainless steel 2 Polished, turndown tips included, as well as clamps and hardware included for installing onto the OEM exhaust system Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 2-1/2" Number of tips included: 2 Exhaust system: dual Exit position: rear (multiple options) Lifetime warranty This crossmember-back system is designed to replace the entire OEM exhaust system from the manifold, or header, back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 3" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 3" Tips sold separately Dual exhaust system Rear side exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.Features: Crossmember-backexhaust system improves engine performance by increasing horsepower, torque, and fuel efficiency on vehicles without catalytic converters Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure Each straight-through muffler has a stainless steel, perforated core that runs directly from one end to the other Stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures, and prevent blowouts No baffles, chambers, or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Moderate tone is smooth yet deep 100-Percent 409 stainless steel construction is rustproof Round, single-wall tips are made of polished stainless steel Simple installation using factory mounting points Clamps and hangers included Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 14" long Number of mufflers: 2 Tip dimensions: 2-5/8" diameter x 9" long Number of tips: 2 Exit quantity: dual Exit location: dual split rear Lifetime warranty This crossmember-back system is designed to replace the entire OEM exhaust system from the manifold, or header, back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 9" wide x 14" long Tailpipe diameter: 2-1/2" Tips sold separately Dual exhaust system Split rear exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
This crossmember-backexhaust system improves engine performance and durability by raising horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Straight-through muffler has a stainless steel perforated core that runs straight through, end to end Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts Contains no baffles, chambers or louvers that restrict airflow Tru-X crossover pipe is designed to balance airflow for dual exhaust systems and to help boost horsepower Signature sound is deep and throaty on throttle but quiet inside the vehicle All materials made with 100% stainless steel Clamps and hangers included for installation Lifetime warranty Specs: Tubing diameter: 2-1/2" Muffler dimensions: 5" tall x 8" wide x 18" long Tailpipe diameter: 2-1/2" Tips sold separately Dual exhaust system Split rear exit position This gas system is designed to replace the entire OEM exhaust system from the manifold or header back to the tailpipe on models from the 1960s and early 1970s.
Cat-backexhaust system has technologically advanced, mandrel-bent tubing and a performance muffler, both of which allow exhaust to flow freely. ... For use with aftermarket metal fascia only. The cat-back system is the portion of the exhaust system from the outlet of the catalytic converter back to the tailpipe. The Rockcrawler Series cat-back systems are designed with a high ground clearance to help prevent damage during your rock crawling adventures.
This cat-backexhaust system has technologically advanced, mandrel-bent tubing and a performance muffler, which allow exhaust to flow freely. This boosts horsepower and torque, improving engine performance and durability.Features: Improves engine performance by increasing horsepower, torque and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure ("exhaust turbulence") Each performance muffler has a stainless steel, perforated core that runs from one end to the other A layer of stainless steel wool insulates the perforated core to absorb noise, shield against high exhaust temperatures, and prevent blowouts No baffles, chambers or louvers that restrict airflow Boasts MagnaFlow's signature sound, which is deep and throaty on throttle but quiet inside your vehicle Made of 100-percent stainless steel to resist corrosion Includes clamps and hangers for installing onto the OEM exhaust system Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 3" Muffler dimensions: 5" tall x 8" wide x 18" long Tip diameter: 3-1/2" Number of tips included: 1 Exhaust system: single Exit position: rear passenger's side Lifetime warranty The cat-back system is the portion of the exhaust system from the outlet of the catalytic converter back to the tailpipe.
This custom-fit cat-backexhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.Features: Cat-backexhaust system improves engine performance by increasing horsepower, torque, and fuel efficiency Mandrel-bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve Unrestricted airflow decreases back pressure Each straight-through muffler has a stainless steel, perforated core that runs directly from one end to the other Stainless steel wool insulates each perforated core to absorb noise, shield from high exhaust temperatures, and prevent blowouts No baffles, chambers, or louvers that restrict airflow Resonator complements mufflers to further reduce noise without interrupting airflow Moderate tone is smooth yet deep 100-Percent 409 stainless steel construction is rustproof Round, double-wall tips are made of polished stainless steel Simple installation using factory mounting points Clamps and hangers included Custom fit for your vehicle Made in the USA Specs: Tubing diameter: 2-1/2" Muffler dimensions: 4" tall x 4" wide x 14" long Number of mufflers: 3 Tip dimensions: 4-1/2" diameter x 5-3/4" long Number of tips: 2 Exit quantity: dual Exit location: dual split rear Limited lifetime warranty The cat-back system is the portion of the exhaust system from the outlet of the catalytic converter back to the tailpipe.
Filters
