Weight Distribution Shank Recommendation for a 2-1/2 inch Hitch Opening
Published 10/29/2014
Products Featured in This Question
Question:
This part # RP54977 will work nicely for my first trailer that uses a trunion style adjustable hitch. But, I have two trailers, the other on has washer and post system for angle adjustment. My new truck has the 2.5inch opening that the skeg goes into. Other than a sleeve adapter to reduce the opening to the standard 2inch , is there another skeg that fits the 2.5inch opening and will work with the washer system for angle adjustment? The truck is a 2015 RAM 2500 crew cab Laramie Longhorn. I didnt see any skegs in your web site that fits the 2.5inch receiver, that can be used with the washer system. What do you recommend?
asked by: Rob
Expert Reply:
Most weight distribution system brands share the same shank design. Without knowing what brand you have it would be hard for me to recommend a shank that would work for your second system. But because most shanks work with different WD heads your best option for a head would be the part # EQ90-02-4900 as it can work with the washer style of system you have.
If the holes on the current shank you have are 1-1/4 inches apart (which is industry standard) then this shank would work as a replacement.
