Question:
hello - we bought a used 36 foot trailer at auction- and upon going and getting it we noticed the landing gear was not useable the way it was. I believe it came off their hauling vehicle at some point - because the landing gear is jammed upward and the spring load pins are bent in a fashion that shows hard force upward. I have FULL welding capabilities - we are a fabrication shop - so cutting these off and re-welding replacements will be easy. but are replacements of this available as a separate unit? They are Bulldog 10,000 or 12,000 lb - 2 speed gear units. the spring load handle is curved with detent positions when puling the handle out.
asked by: John B
Expert Reply:
The only tandem Bulldog Jack set with 2 speeds that we offer is the Bulldog 2-Speed Tandem Landing Gear Set # BD500153. Which if you needed them individually you would want part # BD1823050383.
This jack set has a 45,000 lb capacity and does not have a spring release handle like you said you have though which makes me think you may have something different like the part # BD182800 that you referenced which is actually a single speed jack.
If you need a repair kit for the spring return leg you would want the part # BD500177.
Bulldog Square Jack - Fixed Leg - Sidewind - Weld On - 17" Lift - 22,500 lbs
Bulldog 2-Speed Tandem Landing Gear Set - Weld On - 17" Lift - 45,000 lbs
Replacement 3/4" Drop-Leg Plunger Pin Kit for Bulldog Heavy-Duty, Square Jacks
Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
