Does the Meyer WingMan Commercial-Grade Hydraulic Snowplow Come with Everything Needed?
Updated 03/04/2026 | Published 01/31/2026
Products Featured in This Question
Question:
is every thing a complete kit comes with wiring kit you need any extras to in stall this on 2018 4x4 5.3 engine how much is every thing with tax to Oakmont pa do you have to drill any thing to install how long does it take to install it
asked by: Tom H
Expert Reply:
Hello Tom,
Yes, the Meyer WingMan snowplow is considered a complete plow package. It includes the plow itself, the hydraulic lift and angle system, LED plow lights, and a wired in-cab controller. You are not missing any major plow components right out of the box.
There are a couple vehicle-side items you may still need. The WingMan mounts into a front-mounted 2" Class III receiver hitch, and that hitch is not included with the plow. If your 2018 4x4 5.3L truck does not already have a front receiver, the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31069 is a great option. Tech tips include drilling through the vehicle frame for installation, and trimming of the front air dam and or fascia may be required.
You will also need a 4-pin wiring connection at the front of the truck. Many people already have a 4-pin at the rear, so the most common solution is running an extension from the back up to the front, like # HM48235. No special or proprietary wiring kit is required beyond that.
As far as drilling goes, the plow itself does not require any drilling. It simply slides into the front receiver and pins into place. Any drilling would only be related to installing the front hitch, and that depends on which hitch you choose.
Install time is very reasonable. Plan on about 1 to 2 hours to install the front hitch, and another 2 to 3 hours to route the wiring and mount the controller cleanly inside the cab. Once everything is set up, putting the plow on and taking it off is quick and straightforward. For a first-time install, most people are finished in about 3 to 5 hours. Having a second person around when unboxing and mounting the plow definitely helps.
By the way, is this just for your personal setup, or are you looking to make a few bucks plowing as well?
(click to enlarge)
Product Page this Question was Asked From
Meyer WingMan Commercial-Grade Hydraulic Snowplow w LED Lights - For 2" Hitches - 6'8"
- Snow Plow
- Vehicle Snow Plow
- Fully Adjustable Blade
- 80 Inch Wide
- 26 Inch Tall
- Steel Blade
- In-Cab Switch
- Steel Cutting Edge
- Fits 2 Inch Receiver
- Meyer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Meyer HomePlow ME53FR: Comparing Float Mode vs. Down Pressure
- Q&A: How High Does Meyer Snow Plow Lift Off The Ground? Using On Bumpy Sloped Driveway
- Q&A: Will The SnowBear Snowplow K2AVAL8219 And Curt Front Hitch C31018 Fit A 2013 Ford F-250 4x4?
- Q&A: Do Detail K2 Plows Include Cross Member for Mounting to 2010 Ford F-150 Brackets
- Q&A: Will Meyer WingMan Fit Lifted Truck
- Q&A: Does Blade Stiffener Have to be Connected for Safe Usage of Detail K2 Hitch Mount Snowplow
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: Stability Control for Heavy Duty Vehicles
- Article: Thank you!
- Article: Trailer Wiring Diagrams
Kate F.
3/4/2026
Hey Tom, how did things go getting the Meyer WingMan plow mounted on your 4x4? Did the Curt front hitch and wiring extension work out as expected? Your update could make it easier for others setting up the same plow.