Does Fulton F2 Fully Enclosed, 2-Speed Trailer Winch Have Drill Adapter
Updated 12/29/2025 | Published 12/04/2025
Question:
FW32000101 Fulton winch, Is there a correct adapter available so I can use my cordless drill or the included handle?
asked by: Gary T
0
Expert Reply:
Hi Gary; there are no drill adapters available for the Fulton F2 Fully Enclosed, 2-Speed Trailer Winch # FW32000101. If you wanted to try to use your drill to operate it you would have to make an adapter yourself.
expert reply by:
Robin H
0
Fulton F2 Fully Enclosed, 2-Speed Trailer Winch
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Fulton F2 Fully Enclosed, 2-Speed Trailer Winch with Adjustable Handle - 3,200 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- 2001 - 4000 lbs
- Standard Hand Crank
- Two Speed Winch
- Polyester Strap
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Does The Charging Plug On The Parkit360 Force Electric Trailer Dolly PA46VR Have 2 Or 3 Prongs?
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Q&A: Can One Ball of the TowSmart Adjustable Tri-Ball Mount # TS74VR be Used at a Time
- Q&A: Comparing Curt Trailer Winch C45ZJ And Fulton F2 Fully Enclosed Winch FW32000101
- Q&A: Will The Curve In The Malone Anti-Rattle HitchLock Plate Dig Into The Hitch Receiver
- Q&A: What Frame Dimensions Trailer Valet jack part # TV83FR Fits
- Q&A: Boat Winch Recommendation for a 4,500 lb Boat
- Q&A: Comparing Fulton F2 and XLT Winches
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Boat Trailer Guides: Which are the Best?
- Article: Adding Electric Over Hydraulic Disc Brakes
Robin H.
12/29/2025
Hey Gary, were you able to come up with an adapter for your Fulton F2 winch? Knowing what you tried could help others looking to use a drill with the same setup.