Adding A 7-Way Plug To A 2015 Jeep Grand Cherokee
Updated 07/01/2025 | Published 06/26/2025
Products Featured in This Question
Question:
can i get a 7 blade wire kit to install on a non factory tow package 2015 grand cherokee that has the reverse switch,to deactivate my inertia trailer brakes
asked by: Mark
0
Expert Reply:
We can definitely help you out with that, Mark!
If you already have a 4 flat, like the Curt # C56208, you will just need the Hopkins 7-Way # HM47180 and you are good to go. The center pin of the 7 way will need to be spliced into your reverse light wire and it will do what you need it to. It sounds like you have a surge brake set up, so you will not need to wire the rest of this up.
Do you every pull anything with electric brakes?
expert reply by:
Lazer S
0
Hopkins 7 Way
(click to enlarge)
(click to enlarge)
Continue Researching
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Much Can a 2014 Toyota Tacoma Tow with the Bumper
- Q&A: Recommended 7-Way Connector for a 2012 Toyota Tacoma w/ the Factory Tow Package
- Q&A: Adding a 7-Way Trailer Connector to a 2007 Toyota Tacoma
- Q&A: Will Titan Snow Chains # TC2228CAM Fit 2015 Toyota 4 Runner with 265/70-17 Tires
- Q&A: How Do I Make My Tire Chains Tighter on My 2017 F-150 with Tire Size 265/60/18?
- Q&A: Trailer Wiring Harness Options for a 2011 Lincoln MKX
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Determining Trailer Tongue Weight