Mounting Plate Dimensions For Fulton XLT 2-Speed Trailer Winch F142425
Updated 12/22/2025 | Published 09/30/2024
Question:
Good Morning, I have a new trailer with a single speed Fulton K20, I would like an XLT 2 speed F142425, are the Bolt Patterns the same ?
asked by: Mike C
0
Expert Reply:
Hello Mike, thanks for reaching out. The picture below will show you the mounting plate dimensions for the Fulton XLT 2-Speed Trailer Winch # F142425. I was not able to find any reference for the Fulton K20 jack bolt pattern, so I suggest you compare the measurements below to your jack and see if it is a match. Most Fulton jacks use a similar bolt pattern so you should be good.
Red - 2-3/4"
Blue - 4-1/8"
Green - 5-3/4"
Pink - 6-7/8"
expert reply by:
Jesse M
0
Fulton XLT F142425 Mounting Plate Dimensions
(click to enlarge)
(click to enlarge)
Jesse M.
12/22/2025
Hey Mike, did the bolt pattern on your Fulton K20 end up matching the one on the XLT 2-speed winch? Knowing what you found could help others comparing these two models.