Recommended Top Wind A-Frame Trailer Jack
Updated 05/07/2014 | Published 05/06/2014
Question:
How is this mounted to an A-frame trailer tonguecoupler? I imagine there would need to be a separate weld-on three hole bracket part for this jack like the ones factory installed on most A-frame jacks. Do you sell such a weld-on three mounting hole bracket part? If you do, what is its part number?
asked by: Steve
Expert Reply:
The mounting bracket we sell for the Bulldog Round Jack, part # BD150000, you mentioned is not the weld on style triangular bracket you asked about. It is the Mount Tube for Bulldog Round Jack, part # BDPG9810-00. This attaches to the outer tube of the jack and has a round mount with a pin to secure it into place. I may have another option for you.
I recommend the Pro Series Round A-Frame Jack, part # PS1400600303. This jack has a 5,000 lb lift capacity and has the triangular plate already welded to the jack tube. It can be welded to the trailer frame or bolted into place. This jack has a lift of 15 inches.
If you are interested in a detachable caster for the jack I recommend part # PS1400750340. Using a caster does lower the capacity of the jack. If you need a detachable footplate for the jack I recommend part # PS1400700340.
I have attached a link to a product review video you may find helpful.
