Where Does The White Wire On The Back Of The Progressive Dynamics PD4135K Get Wired To
Updated 11/06/2023 | Published 11/04/2023
Question:
Does the white wire coming out from the rear of the 4100 converter need to go to both battery neg. And chassis ground?
asked by: Peter
0
Expert Reply:
The white wire on the back of the Progressive Dynamics 4100 Series RV Converter # PD4135K just needs to be ran to the negative terminal on the battery.
expert reply by:
Kevin C
0
Continue Researching
- Video: Review of the Redarc In-Vehicle BCDC Trailer Battery Charger
- Shop: Redarc In-Vehicle BCDC Trailer Battery Charger - Dual Input - DC to DC - 12V - 12 Amp / Solar 40 Amp
- Q&A: Where to Connect Negative Side of Battery to 35 Amp Progressive Dynamics RV Power Control Center
- Q&A: What Does the Manual Wizard Button Do on the Progressive Dynamics Power Control Center PD4135K?
- Shop: Floor Mats
- Shop: Suspension Enhancement
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: All About the Deka Battery Isolator Installation Kit for Standard Alternators
- Q&A: Recommended Battery Monitoring System For RV Batteries To Help Prevent Overcharging
- Q&A: Can Trailer Battery be Set Up to be Charged When Towing and From Shore Power
- Q&A: Will The Charging System on Tow Vehicle Damage a Lithium Travel Trailer Battery When Towing?
- Shop: Deka Battery Isolator Installation Kit for Standard Alternators - 8 Gauge Wire
- Shop: Replacement L-Pin Clip for Equal-i-zer Weight Distribution Systems
- Shop: Redarc RedVision Total Vehicle Management System with Manager30
- Shop: Replacement Socket Pin Clip for Equal-i-zer Weight Distribution Systems - Qty 1
- Shop: Replacement Pin and Clip for Equal-i-zer Weight Distribution Spring Bars
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Q&A: Could Redarc In-Vehicle BCDC Battery Charger Power 3-Way RV Fridge
- Q&A: What Gauge Wire Is Required On a 7-Way Connector