Where Does Power Wire of Tekonsha Trailer Wiring Run for 2023 Ford Maverick Hybrid

Question

Question:

Are there instructions for installing the TK53VR wiring harness on the *hybrid* version of the 2023 Ford Maverick? The battery is located under the rear seat on the passenger side for hybrid powertrain Mavericks.

asked by: Nathan W

0

Expert Reply:

When running the power wire for the Tekonsha wiring harness part # TK53VR you would need to run it to the battery in your rear seat like you mentioned. There isn't anything different that would need to happen.

expert reply by: Jameson C

0

Answer 1

It sure does, yes; I verified directly with the manufacturer that the Curt hitch does fit your 2023 Ford Maverick. The correct part number for your truck is the following: - Curt Trailer Hitch Receiver #C84BR The #C84BR is a complete bolt-on…

view full answer...

Answer 2

Yes, it will. I checked with Tekonsha and the T-One Vehicle Wiring Harness item #TK53VR does fit the 2023 Ford Maverick Hybrid. This custom-fit T-One connector plugs into your Maverick's wiring harness, which is located behind the tail lights. It…

view full answer...

Answer 3

Hey Tim, so we get this question a lot and we totally understand the temptation to run the power wire to an easier location than the battery but you do really have to run the line up to the battery. The reason for that is this is a form of circuit…

view full answer...

Answer 4

Yes the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK53VR you're looking at will fit all models of the 2022 Ford Maverick to include the Hybrid.

view full answer...

Answer 5

Hello Jim, Yes, I have attached an install video on a 2022 For Maverick for the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM97RR. Unfortunately, setting up a vehicle for flat-towing is going to void warranties pretty much no matter…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Where Does Power Wire of Tekonsha Trailer Wiring Run for 2023 Ford Maverick Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching