Looking for A-Frame Trailer Jack That Retracts Enough to Clear Driveway Aprons
Updated 03/14/2014 | Published 03/13/2014
Question:
Hello, We currently have an A-Frame jack that does not fully retract enough up into the trailer. The end result is that it scrapes along the ground when entering a drive that is at an incline. We are looking for a jack that can fully retract or possibly flip up and still be able to the strong enough for our trailer with a smoker on it. Please see the picture attached. Can you please help recommend the proper jack? Thanks
asked by: Christopher B
Expert Reply:
Swivel jacks do not work well with A-frame trailers, so a swivel jack would not be a good choice. Your best bet would be to stay with an A-frame jack.
I would recommend finding the jack with the lowest possible retracted height. For instance, the Pro Series # PSEA20000103 you mentioned has a retracted height of 8 inches, which would be the distance between the bottom of the jack tube and the mounting bracket. The Pro Series # PS1401000303 has the same 2000 lb capacity as the jack you mentioned, but the retracted height is only 5-1/2 inches, which is the lowest retracted height we offer.
