Troubleshooting Furrion Vision S Wireless Camera System with Side Cameras That Do Not Have Signal
Updated 04/17/2023 | Published 04/14/2023
Question:
Just hooked ip my furrion camera system. Rear and two side cameras. Im getting a blue light and Ive got a picture on my monitor but i cant get a signal on the side cameras. Is there a power light on the side lights? Any suggestions?
asked by: Scott B
Expert Reply:
I was not able to locate a purchase order to be sure what camera system you have, but it sounds like you have something similar to the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07.
The side marker lights do have both an LED indicator, which tells you that the cameras have power and a pairing button to pair the cameras to the monitor. I have included a picture that shows where these indicators/buttons are.
I would start by verifying that the side cameras have power. Then ensure they are properly paired to the monitor and lastly make sure the monitor is switched to view the side cameras.
Another thing to consider is how you have the back-up camera wired. If it is wired to the reverse light and only comes on in reverse, it could be that the side cameras are not receiving power. You will want to make sure you running lights are turned on so the side cameras are receiving power.
If you have a different system, please let me know which one you have if the cameras do not have the indicators/buttons. Or if you try those steps and still do not have signal, please let me know and we can further troubleshoot.
(click to enlarge)
