Trailer Wiring Recommendation for 2020 Toyota Camry Hybrid

Question

Question:

hello.what part i need to my toyota camry hybrid SE 2020 for trailer lights?thanks

asked by: Jose

0

Expert Reply:

The best trailer wiring option we have for your 2020 Toyota Camry Hybrid is the Tekonsha part # 118763 that you referenced. This is the most reliable and easiest to install option.

expert reply by: Jameson C

0

Answer 1

In all honesty, due to the circuit protection a powered converter provides, that's really what you'll want to use. None of our hitch wiring manufacturers offer plug-and-play a non-powered option, so it's really a moot point. I'd…

view full answer...

Answer 2

Hello Gwyn, may the force be with you. While we unfortunately do not carry the Star Wars Rebel Alliance cover for 1-1/4" hitches, we do offer some other Star Wars covers that will fit: - Star Wars Stormtrooper Trailer Hitch Cover - 1-1/4"…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

While I can understand not wanting to splice any wiring, you'll have to do so to add a brake controller to your 2022 Ford Edge ST, as there isn't a plug-and-play brake controller option. So what you'll need are the following for the…

view full answer...

Answer 6

Hi Tom, Good observation, and I can confirm for you that yes, the Draw-Tite Trailer Hitch Receiver #36643 does fit your 2020 Toyota Camry hybrid with the exhaust on the driver's side. I have added a cut out of a review for you a customer was nice…

view full answer...

Answer 7

Hi Tyler, To replace the hardware for the Draw-Tite Trailer Hitch Receiver #36643 that fits your 2022 Toyota Camry; what you will need is the following: - Replacement Hardware Kit for Trailer Hitches #RHK All you need to do is click #RHK, enter…

view full answer...

Answer 8

We do have a receiver that is custom fit for your 2021 Toyota Camry XLE Hybrid as the Curt Trailer Hitch Receiver #C13900 is not going to fit your Camry. It is designed to fit multiple trucks, vans and SUV's that have a frame width of 31",…

view full answer...

Answer 9

For a 3,000 watt inverter you'll need a 300 amp hour lithium battery like the Go Power Sun Cycle Advanced Lithium RV Battery item #GP26QR.

view full answer...

Answer 10

For your 2022 Kia Soul, as long as it's not the 1.6L Turbo model, I highly recommend the Draw-Tite Class III Trailer Hitch #DT25GR. This is because it offers a 2" receiver which will open the door up to many more options when it comes to…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Trailer Wiring Recommendation for 2020 Toyota Camry Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching