Correct Front Mount Trailer Hitch Fit for a 2023 Ford F-150

Question

Question:

When will you confirm that this hitch will fit 2023 Ford F-150 supercrew Lariat: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2 Item # 65067 Thanks,

asked by: Knox W

0

Expert Reply:

I checked with Draw-Tite and the Draw-Tite Front Mount Trailer Hitch Receiver part # 65067 is a confirmed fit for a 2023 Ford F-150, all models without an active air dam. This hitch features a bolt-on fit without any drilling required. It will be a great addition for snowplows, winches, or just simply moving around a trailer.

expert reply by: Conner L

0

Answer 1

The Draw-Tite Front Mount hitch part #65067 installs so that it sticks out from the plastic air dam of the Ford. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. I have attached a photo for your…

view full answer...

Answer 2

The Draw Tite hitch part #65067 is a fit for your 2022 Ford F-150 as long as it doesn't have the auto deploying air dam. It would not reduce ground clearance either since it fits the air dam gets cut around it when installed.

view full answer...

Answer 3

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 4

I have included some pictures of Curt Front Mount Trailer Hitch Skid Shield #C31007 for you. The overall height of the skid plate is 4-1/4 inches, overall width is 4-7/8 inches. The overall length of the unit end to end is approximately 8-3/8 inches.…

view full answer...

Answer 5

I haven't ever personally used a front hitch to maneuver a trailer, but I do know that everyone I know that has one, swears by it as the greatest solution for this problem. It will definitely make getting your trailer into a tight space easier,…

view full answer...

Answer 6

Curt hitch #C31083 is listed as a fit for the XLT trim on the 2018 Ford F-150. They do not specify anything regarding the FX4 package. You will most likely have to trim some fascia, skid plates, or remove them to complete the hitch installation of…

view full answer...

Answer 7

I must admit to not being sure what you are referring to. The Curt Channel Style Adjustable Ballmount #C45900 does not have the three holes as the anti rattle piece ( #C24DR ) screws into the back of the actual ball part (see picture). Was there…

view full answer...

Answer 8

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 will actually work with the auto deploying air dam on your 2022 Ford F-150, although there is some trimming of the air dam and the reinforcement bracket to get it installed (see attached photo…

view full answer...

Answer 9

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires that…

view full answer...

Answer 10

I suggest the Draw-Tite Front Mount hitch, #65067 that installs through a cut out in the plastic air dam of the F-150. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. Trimming the lower air dam…

view full answer...

Answer 11

Though this technically will work when looking at all the measurements, I cannot recommend doing so. Here's my reasoning behind saying that. With your fully loaded trailer having a tongue weight of 315 pounds and your loaded bike rack weighing 50…

view full answer...

Answer 12

You actually don't really lose any ground clearance when you have the front hitch part #65067 installed on your 2016 Ford F-150. The lower air dam on the front of the truck gets trimmed out to allow the hitch to fit at basically the same height…

view full answer...

Correct Front Mount Trailer Hitch Fit for a 2023 Ford F-150

Continue Researching