Options for Re-Sealing a Horse Trailer Roof

Question

Question:

Need to reseal horse trailer roof. Not metal. White board.

asked by: Jo A

0

Expert Reply:

For sealant we have the TremPro 644 Silicone Sealant # 0160297 which adheres to rubber-like roofing materials, aluminum, galvanized metal, plastic, vinyl, fiberglass, wood, and even mortar and concrete.

If you are meaning that you need to redo the complete roof, we have the Alpha Systems Superflex TPO RV Roof Membrane # AL68CV and the Alpha Systems RV Roof Replacement Installation Kit for Roofs # AL63FJ.

If this is not what you are looking for, please provide more information and maybe a photo and I would be happy to help you further.

expert reply by: Scott S

0

Answer 1

Yes, the Chrome Bracket and Single Wire Plug #A67CB that you referenced is the correct base for the #MCL63AB and #MCL63RB that you plan on getting. The reason this bracket uses a single wire is because the light will ground through the mounting…

view full answer...

Answer 2

We don't have specific fit information for the clearance lights of trailer manufacturers. We do carry virtually every trailer clearance light though, so the best recommendation I can make is to check out the link I attached to the right that has…

view full answer...

Answer 3

The TremPro 644 Silicone Sealant part #0160297 is what we use for general roof repair and it will work great for you as well as it works on both aluminum and galvanized metal.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Options for Re-Sealing a Horse Trailer Roof

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching