Parts Needed To Add 4-Way Flat Connector On a Rialta Camper With 6-Way Pin Connector

Updated 07/07/2022 | Published 07/05/2022

Products Featured in This Question

Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester - 6-Pole to 4-Pole

(17)

$23.28

RoadMaster 6-Wire Trailer Connector - Trailer End

(42)

$20.44

Question:

Will this HM47320 adapter work for a Rialta camper with a 6pin round connector to a trailer with 4pin flat. The current 6round to 4flat adapter is missing pins, however works for running, Turn R and L, but not stop lamps. So I need an adapter the merges the functions of StopandTurn Pinout looks to be Ground L-Turn R-Turn Stop Running BackupCenter Thanks

asked by: Ned H

Expert Reply:

To connect your 4-way trailer to your Rialta camper you will need a Hopkins Tail Light Converter # HM48847 and Hopkins Endurance 4-Way Flat Trailer Connector Socket # HM48030. These will allow you to tie into the wiring going into your 6-way connector to combine the turn signals and brake lights to work on the 4-way wiring. The converter is labeled to ensure you connect up the wiring correctly and the socket has mounting holes allowing you to leave it installed. Or you can wire it to a 6-Way Connector # RM-910030-8 if you want to make it removable.

The Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester # HM47320 does not convert any of the wiring and only removes 2 of the pins so it will not allow you to have your lights working correctly.

expert reply by: Bud M