Recommended Trailer Hitch For A 2017 Volvo V60 T6 R

Updated 05/16/2022 | Published 05/15/2022

Products Featured in This Question

Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K

(798)

$72.46

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(18)

$70.46

Question:

Hi, I would like to put a trailer hitch on a 2017 V60 T6 R. Will it scrape if I put a frame trailer hitch receiverinch on the car without raising the suspension? The 2017 V60 R design clearance is 5.4 The 2017 V60 Cross Country design clearance is 7.9 The product in question is the: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 75916 How low does the frame go? thanks so much for your attention on this matter.

asked by: Tim B

Helpful Expert Reply:

When it comes to installing The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75916 on your 2017 Volvo V60 T6 R the hitch is confirmed to fit your vehicle and will not scrape when in use. There is a possibility it will scrape if you're going up a steep incline depending on how steep it is.

The trailer hitch has an easy, bolt-on installation that requires no welding, and has a black powder coat finish theat covers the e-coat base for superior rust protection.

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56287 has a simple plug and play installation that plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. Using this harness will allow your trailer's taillights to mirror the vehicle's taillights.

To finish your towing experience The Curt Starter Towing Kit # C45534 includes the ball mount, the 2 inch hitch ball and other starter towing accessories that will make your experience better.

I have attached an installation video link below.

expert reply by: Noah E