Ski Rack Solution that Can Attach to Top Channel of Thule Xsporter Ladder Rack

Question

Question:

Looking for a ski rack that is compatible with this ladder rack from Thule xsporter bed rack. Thanks!

asked by: Ben

0

Expert Reply:

With the T-Channel Mount Kit for Kuat Grip Ski and Snowboard Carrier # GRDMK you can use any of the Kuat Grip Ski and Snowboard carriers as this will allow the carrier to attach to the top channel of the Thule Xsporter. For Grip that can carry up to 6 pairs of skis we have the # GRR6B or for 4 pairs part # GRR4P.

expert reply by: Jameson C

0

Answer 1

There is an option for for a T-slot kit to fit your Adarac ladder rack for a Malone kayak carrier, though not the Malone FoldAway-5 Kayak, SUP, and Canoe Carrier #MAL38FR. Instead, what you will need is the Malone J-Pro2 Kayak Carrier with Tie-Downs…

view full answer...

Answer 2

I contacted Malone and the Malone XtraLight Trailer (MPG525) is not compatible with Crossbars for Malone MicroSport Trailers - 78" Long part #MPG4001. The only trailer that can use the longer cross bars is the Malone Microsport trailers that…

view full answer...

Answer 3

I recommend picking up the Aero Style Crossbar T-Slot Fit Kit #MPG8287 which comes with bolts, nuts, and washers that will fit in the Yakima HD Bar T-Slots like the 78" part #Y01159. If you're trying to find specific dimensions for your own…

view full answer...

Answer 4

The Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XT has bars which are 4" wide so in order to mount the Malone DownLoader Kayak Carrier with Tie-Downs #MPG114MD you will need the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers…

view full answer...

Answer 5

The best way to install the Malone Downloader part #MPG114MD on the Thule Aeroblade crossbars will be with the T-slot adapter part #MPG8287. This will give you the super solid connection point you are looking for.

view full answer...

Answer 6

Thule basically purchased TracRac and changed the part numbers but not the actual bars themselves. So if you have the older TA29200 the #TH29200XT is the exact same. Just the feet of this is not available as a replacement part.

view full answer...

Answer 7

The add on Cantilever Extension for Thule TracRac SR, G2, and T-Rac Pro2 Ladder Racks part #TH24002XT or the Cantilever Extension for Thule TracRac TracONE Ladder Racks part #TH24001XT will work with the older TracRac. You just have to determine what…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Ski Rack Solution that Can Attach to Top Channel of Thule Xsporter Ladder Rack

Products Featured in This Question

Continue Researching