Tools Needed To Install Trailer Hitch Receiver and Wiring Harness On a 2019 Hyundai Tucson

Published 12/10/2021

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(214)

$185.37

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(75)

$81.46

Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 1-1/4" Hitch

(12)

$12.67

Question:

Just want to double check that I dont need any other parts to install a hitch on a 2019 Tucson. The hitch and electrical package contain everything needed? Thank you

asked by: Philip N

Helpful Expert Reply:

For your 2019 Hyundai Tucson the Draw-Tite Max-Frame Trailer Hitch Receiver # 75836 includes the receiver, 7 mounting bolts and 7 washers needed to install the receiver on your Tucson. You will need the following tools to install this receiver. A 16mm socket, ratchet wrench, torque wrench capable of at least 42ft-lbs torque and a flat head screw driver. Safety glasses are recommended to protect your eyes from any foreign objects that may drop off the frame.

The Tekonsha T-One Vehicle Wiring Harness # 118812 will provide you with all the wiring needed to install a properly functioning 4-way flat connector on your Tucson. The tools needed for this installation are a trim panel remover, 10mm socket and ratchet or 10mm wrench, drill (3/32” drill bit), fish tape, test-probe and a utility knife.

The Curt Easy Mount Bracket # C58002 will provide you a secure place to mount the end of the 4-way connector. This helps to ensure that it is easy to access and does not drag on the ground.

expert reply by: Bud M