How To Power The Jensen LED RV TV # JTV1917DVDC

Question

Question:

can this 12 volt tv be powered by the built in USB port in my camper?

asked by: Richard A

0

Expert Reply:

USB ports typically only have a power output of 5v so you won't be able to power your Jensen LED RV TV with DVD Player # JTV1917DVDC using that port. If you needed to use the Power Adapter Cord for Jensen LED Televisions # DCCIG09 and needed a 12v outlet you can install the Multi Device RV Charging Station - 12V Socket - 2 USB Ports - Hardwire - Black # 37215095.

expert reply by: Kevin C

0

Answer 1

Hey Daniel so, none of the RV TVs we carry have Bluetooth capabilities as RV TV tech is incredibly behind the times compared to what are in peoples houses. Like for example this is only a 720 TV which isn't even HD.

view full answer...

Answer 2

I reached out to JR Products and they informed me that the Multi Device RV Charging Station part #37215095 comes with 20 gauge wire on the USB port terminals. The 12 volt outlet will accept up to 20 amps but you must then use at least 14 gauge wire.

view full answer...

Answer 3

The BOLT Trailer Coupler Lock #BL7032495 is theft deterrent. I can't say there are any lock systems out there that will 100% not come off. It really comes down to how good the thief is and how hard he is willing to work for it. The benefit to…

view full answer...

Answer 4

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

view full answer...

Answer 5

I checked the owners manual for your 2007 Toyota FJ Cruiser and there is nothing keeping you from using a weight distribution system on your vehicle. The towing capacity of your vehicle is rated at 5000 lbs, and tongue weight is rated to be a 500 lb…

view full answer...

Answer 6

To determine if you will be able to use a weight distribution hitch on your 2013 Toyota Highlander you will want to check the data tag on the receiver. This tag will tell you if your receiver is rated to be used with a weight distribution hitch. If…

view full answer...

Answer 7

That's a good question, but coil springs like the Firestone Coil-Rite Air Helper Springs #F4175 do not have to fill up the entire vertical space of the spring during installation. What you are seeing in regards to photos is likely the spring…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

How To Power The Jensen LED RV TV # JTV1917DVDC

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching