Roadmaster Base Plate Kit to Use with Stowmaster Tow Bar for 1995 Jeep Wrangler

Question

Question:

I have an older Stow Master tow bar serial no. 026794. I want to tow a 1995 Jeep yj with this tow bar and need to know what I need to attach the towbar to the Jeep. If you send me an e-mail, I can attach photos of my towbar setup. Thank you.

asked by: Mary A

0

Expert Reply:

For your 1995 Jeep Wrangler YJ and your Roadmaster Stowmaster tow bar like the # RM-504 the base plate kit you'd need is the part # 1409-3 and you'd be set.

expert reply by: Jameson C

0

Answer 1

Thank you for your question, Stef! The Roadmaster StowMaster Tow Bar part #RM-501 doesn't come with the baseplate (the part that attaches to the frame of the vehicle). I'm more than happy to find the parts you are needing. Comment with your…

view full answer...

Answer 2

I wish we had a way to store the Curt tow bar part #C19745 vertically on a vehicle it's towing. You'd have to go with a tow bar that has more features to be able to accomplish that like the Roadmaster Stowmaster part #RM-504 which I attached…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

view full answer...

Answer 5

When measuring frame width for determining a fit for a hitch like the Curt #C13701 you want to measure from outside to outside. The Curt hitch #C13701 wouldn't work for you since your inside to inside measurement is 51 inches. Instead you would…

view full answer...

Answer 6

I have a solution for you, but the Curt #C15325 is a custom fit hitch designed for older Chevy K-Series pickups; the distance between the mounting holes from side to side will be approximately 35". We have seen many folks these days adding…

view full answer...

Answer 7

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Roadmaster Base Plate Kit to Use with Stowmaster Tow Bar for 1995 Jeep Wrangler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching