Best Way to Charge Trailer Battery Using Vehicle Battery
Published 11/02/2021 >
Products Featured in This Question
Question:
I have a cargo trailer that has Hopkins 20400 Engager. I want to add a marine battery for lights in cargo trailer. How can i while traveling charge my marine battery. Also if i add a ProMar1 DS Digital - 5 Amp or similar to the marine battery to charge when not in use will this cause a problem? Also, should i keep the Hopkins or remove it and use the marine battery? If so what would i need to purchase to replace the Hopkins technology that runs emergency braking system? Sorry for such a crazy questions.....
asked by: Michael
Helpful Expert Reply:
You will want to use a marine battery in addition to the Hopkins Engager # 20400 because you want a dedicated battery for your breakaway brake function. If your marine battery was depleted and the pin pulled for the breakaway system then this means your trailer brakes won't activate.
The ProMar1 DS Digital charges a battery when plugged into AC power (like a standard wall outlet) so you will need something different to charge while in transit. For that I recommend the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1225D which allows you to safely charge your battery bank to 100% whereas most other chargers will only reach about 80% capacity of the actual battery. Another perk to this system is that you can eventually add solar panels to the mix which might do a good job of working when the trailer is parked instead of plugging into a socket.
You will need some additional parts to properly install the BCDC charger, all of which can be found in the kit # e79ZR on our site. I have attached a video of the BCDC being installed on a trailer for you to check out.
Product Page this Question was Asked From
Hopkins Engager Trailer Breakaway Kit w/ Charger, LED Tester, Hardware, and 5 Ah Battery - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-Axle
- Tandem-Axle
- LED Indicator
- Electric
- Battery Included
- 5 Ah
- 48 Inch Long
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Charge a Dump Trailer Battery
- Shop: Trailer Installation Kit for Redarc BCDC - 25 Amp
- Shop: Bright Way Trailer Breakaway Kit with Charger, LED Tester, and 5 Ah Battery - Side Load
- Search Results: break away system
- Search Results: solar panels
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Hubs and Brakes for Axle Tecknology BD2-655 Drums
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Q&A: How To Add Brakes to a Bass Tracker Boat Trailer
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Distance Between Caliper Mounting Holes on Replacement Caliper Bracket for DeeMaxx 6K Brakes
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Q&A: Chain Extender Recommendation for Swagman Original 4 Bike Towing Rack
- Q&A: Older Generation Primus Cequent Brake Controller User Manual


