Tip to Use Curt Trailer Wiring Kit C34FR on Hybrid Model

Question:

i have been trying a Curt 56417 and it has not worked!!!

asked by: Cliff

Expert Reply:

We had one customer who moved some wires on their Curt # C34FR harness to allow it to work on the hybrid models of the vehicle. Here's what they tried that worked for them:

"After a little investigation with a meter I noticed the wire for the right/left turn signals coming off the two pass thru connector sets did not line up with the wire connected to the blinker on the car. I cut and re-soldered the wire so on the right side/passenger side the tap off wire matched the car blinker wire and the trailer blinker started working See the green wires in the attached picture. I had to cut the green wire and move it over one position. I repeated the modification for the left/driver side and that one started working. So it works but you may have to cut and reconnect the green/yellow blinker wires. I soldered the wire when I flipped them over but one of those in line splices would probably be easier. "

expert reply by: Jameson C