Is There Fascia Trimming Required on the Draw-Tite # 76290 for My 2022 Honda Passport?

Question

Question:

Is fascia trimming required when installing the draw-tite 76290 on my 2022 honda passport?

asked by: Malone

0

Expert Reply:

There is no fascia cutting/trimming required for the installation of the Draw-Tite # 76290 on your 2022 Honda Passport. If you need help with the installation, I went ahead and attached a video of the hitch being installed on a 2021 model. It will be nearly identical to your 2022 model Passport.

expert reply by: Bob C

0

Answer 1

I can certainly help you out. The TW is the tongue weight. This is the weight of the trailer at the coupler that attaches to the ball mount on the trailer hitch. It should be 10 to 15 percent of the GTW or gross trailer weight. The gross trailer…

view full answer...

Answer 2

I see that you'd looked at the Curt item #C51170 Spectrum Brake Controller. While I really like the idea of a remote-type brake controller that features a control unit that mounts out of sight under the dash with a knob that mounts within the…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #76290 for your 2022 Honda Passport is confirmed by Draw-Tite to fit all models including your TrailSport. The rear fascia and undercarriage of your TrailSport look identical to the chassis on the 2021…

view full answer...

Answer 4

Installing the Draw-Tite #76290 hitch on your 2022 Honda Passport will require absolutely no drilling or trimming to get it to fit. This hitch is rated 3 out of 10 on our install difficulty scale and really shouldn't take much more than 30…

view full answer...

Answer 5

If you were hoping for easy installs on your 2021 Honda Pilot, you are definitely in luck! To start with, the Tekonsha T-One Vehicle Wiring Harness #118291 is a plug and play option that will be a very easy way to get a 7 Way plug, which is needed…

view full answer...

Answer 6

When it comes to hitches that we have available for your 2020 Honda Passport that can be used with a weight distribution system, the Draw-Tite #76290 is a confirmed fit for your new Passport and can be used with weight distribution systems like the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The etrailer hitch item #e44AR you referenced has the same protrusion from your rear fascia as the Curt Trailer Hitch Receiver item #C13421. These hitches are manufactured by the same company and are identical except for the matte coating on the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Is There Fascia Trimming Required on the Draw-Tite # 76290 for My 2022 Honda Passport?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching