Safety Chain Loop Bracket for Installing New Safety Chains on Trailer
Updated 08/03/2021 | Published 08/01/2021
Products Featured in This Question
Question:
I have a 2018 microlite trailer, the safety change are on a welded bracket on the bottom of the tongue. What chains would work best to replace my stock ones, how do I get the stock ones off the welder on bracket, and how do I attach new safety chains to a welded bracket?
asked by: Steve W
0
Expert Reply:
I'd take the trailer up to a welder with the new safety chains like part # FCHA0050324 and safety chain U-Loops part # 362ChainLoopU and have them cut the old brackets off and install the new ones.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Safety Chain with Clevis Hook - 18,800 lbs - 46" - Qty 1
- Trailer Safety Chains
- 5/16 Inch Diameter
- Standard Trailer
- 42 Inch Long
- 18800 lbs
- Single Chain
- Clevis Hooks
- Fulton
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Shocker Gooseneck Pin Box
- Q&A: Recommended Safety Chains or Cables for 14k Horse Trailer.
- Q&A: Can Straight and Cambered Axle be Used on Tandem Axle Trailer
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Q&A: Replacement 3,500 lbs Axle w/ a 86-1/2" Hub Face
- Q&A: How to Choose Correct Capacity for Trailer Safety Chains
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Conversion Kit to Upgrade Manual Dometic Awning to Power Awning
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern