Brake Controller And 7-Way For 2011 Lincoln Navigator With Factory 4-Flat
Updated 06/09/2021 | Published 06/07/2021
Products Featured in This Question
Question:
Hello. I have the factory 4-wire connector for trailers on my Lincoln Navigator. Id like to upgrade to the 7-wire trailer connector. I would also like to add the brake module and wiring. I understand the 7-wire connector also charges the RV batteries. I havent seen this referenced, so Id like to ensure I get the kit that provides the full 7-wire functionality. Thank you.
asked by: Armando R
Helpful Expert Reply:
We can get your 2011 Lincoln Navigator with the factory 4-way set up with a 7-way and trailer brake controller; and you are correct that a 7-way has a 12 volt pin which allows you to trickle charge an RV battery. So because your '11 Navigator has the factory 4-way, the only thing you need to add for the 7-way is the following part:
- Adapter 4-Pole to 7-Pole and 4-Pole # 37185
With that, the other thing you will need is the brake controller as well as the plug-in adapter, and I recommend an option from Curt for smooth braking at a very good price:
- Curt TriFlex NEXT Trailer Brake Controller # C24VV
- Curt Custom Wiring Adapter # C51322
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Search Results: etbc7
- Shop: Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Discovery NEXT Trailer Brake Controller - Up to 4 Axles - Time Delayed
- Shop: Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)