Trailer Wiring Harness Fit For 2021 Ford Bronco Sport

Question

Question:

What is the wiring harness for a bronco sport 2021 model that will fit

asked by: Larry S

0

Expert Reply:

We do have a trailer wiring harness that fits your 2021 Ford Bronco Sport, which is the following part:

- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR

This harness is manufactured by Tekonsha, who is known to make the most reliable trailer wiring harnesses in the industry, so it's going to provide you with the best way to power your trailer's lights. It does store in your Bronco Sport's rear cargo area when you aren't using it, so you don't need a mounting bracket.

If you also need a trailer hitch receiver for your 2021 Bronco Sport, the options are:

- Draw-Tite Max-Frame Trailer Hitch Receiver # DT93MR

- Curt Trailer Hitch Receiver # C76HR

Both have the same 3,500 lb towing, 525 lb tongue weight capacities, but I recommend going with the Curt as it's the easier install.

expert reply by: Kyle S

0

Answer 1

To add a hitch to your 2023 Ford Bronco Sport, I recommend the etrailer Hitch item #e57KR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because…

view full answer...

Answer 2

Good question, and there is just one difference between the Curt and etrailer trailer hitches that fit your 2022 Ford Bronco Sport, and that's their finish. The Curt hitch has a glossy black finish while the etrailer hitch has a matte black…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Trailer Wiring Harness Fit For 2021 Ford Bronco Sport

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching