Regulator for Generac Propane Generator
Updated 01/18/2021 | Published 01/14/2021
Products Featured in This Question
Question:
I want to hook up a Generac 22 kw generator to 2 or more 100 LB propane tanks. The tanks will be about 50foot from the generator. According to the book I will need to supply 355,000 BTU/h and 12inch WC . Can you tell me what fittings and regulators I would need.
asked by: Tim C
Expert Reply:
12 inch water column is standard for LP low pressure propane so for a regulator the # 108220 would work great as it is an LP regulator capable of 400,000 btu/hr.
Now the longest supply hose we have is 12 feet like with the part # 37207-31365 which would not cover 50 feet and we aren't able to determine what fitting your generator may need so you might confirm that and we can go from there.
Continue Researching
- Shop: MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 1'
- Search Results: dual 20 lb tanks propane accessories
- Shop: MB Sturgis Propane Pigtail w/ Back Check - Type 1 x 1/4" MIF - Stainless Overbraid - 1'
- Shop: Propane Hose - 3/8" Female SAE Swivel x 3/8" Female SAE Swivel - 12'
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Q&A: Propane Regulator for a Modine 45K BTU Hot Dawg heater
- Q&A: Recommended Hose And Regulator For A 44,500 BTU Propane Oven/Stove
- Q&A: Which Way Should A Regulator Vent Face
- Q&A: Troubleshooting A Regulator That Freezes Up When Hooked Up To A 40lb Tank
- Q&A: How To Attach a 100 Lb and 40 Lb Propane Tank to the MB Sturgis Vertical 2-Stage Propane Regulator
- Shop: Camco Low-Pressure LP Gas Regulator w/ 12' Long Hose
- Shop: MB Sturgis Type 1 Propane Tank Connector - 200,000 BTU
- Shop: MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 2'