What is Tongue Weight Capacity of Stealth Hitch that Fits 2017 Audi A4 Allroad

Question

Question:

I just got my Stealth hitch and noticed the tongue weight says 450 lbs but the installation guide says 30 0lbs. I justified the extra $$ for the higher load capacity. Can you confirm which is correct?

asked by: James

1

Helpful Expert Reply:

We just confirmed with our contact at Stealth that the tongue weight capacity of the Stealth hitch part # 391AUDA417 that you referenced is 400 lbs.

expert reply by: Jameson C

1

Answer 1

The best trailer hitch receiver option for your 2023 Audi A4 Allroad comes from Stealth Hitches and they have 2 different kits available depending on what you plan to use the hitch receiver for: - Hidden Rack Receiver #391AUDA417 (for bike rack and…

view full answer...

Answer 2

I called Stealth Hitches to confirm. I am happy to inform you that the Hidden Hitch for your 2017 Audi A4 Allroad, part #391AUDA417, will still allow you to use the kick function. They will not interfere at all.

view full answer...

Answer 3

The trailer wiring that comes with the Stealth hitch part #391AUDA417T works just fine with sequential taillights. Basically the program that makes the taillights sequential is in the light assembly setup whereas the lighting harness wires to the…

view full answer...

Answer 4

Yes, the installation instructions for the Stealth Hitches #SH74ZR are attached below. You will need to remove the rear tail lights, fascia, and factory reinforcement beam. The hitch will replace the reinforcement beam on your 2023 Audi A6 Allroad.…

view full answer...

Answer 5

Sorry about the link not working. I would be happy to help you. I pulled a picture from the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" item #391AUDA417T instructions. This diagram shows exactly where you will…

view full answer...

Answer 6

If you have basic hand tools and basic mechanical skills (sounds like you do), then the install of the Stealth hitch part #391AUDA417T wouldn't be difficult at all. If you didn't want to mess with the install though best option to find a…

view full answer...

Answer 7

The Stealth Hitches Rack Receiver part #391AUDA417T is what I recommend for a 2019 Audi A4 Allroad. The Stealth Hitches Rack Receiver is a bolt-on fit with a completely hidden design therefore you can maintain the factory look of your vehicle. In…

view full answer...

Answer 8

Really good question, and the wiring kit is a passive one for the Stealth Hitches receiver and wiring kit that fits your 2018 Audi S4, which is the following part number: - Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #391AUDA417T I…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is Tongue Weight Capacity of Stealth Hitch that Fits 2017 Audi A4 Allroad

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching