Difference Between the Tow Ready Harness and the Curt Harness for a 2009 Toyota Corolla
Updated 12/31/2012 | Published 12/30/2012 >
Products Featured in This Question
Question:
Why does #118459 have to be run to the battery, when#55542 only need to be wired at the tail lights ? Also #55542 is about $ 10.00 cheaper and looks even easier to wire.
asked by: Ralph
Expert Reply:
The reason a wire is run to the battery on the Tow Ready Harness # 118459 is to help protect the tail light circuitry of your 2009 Toyota Corolla. You see, the # 118459 uses the tail light circuitry of the vehicle merely as signal wires and powers the tail lights of your trailer with the power it gets from the battery. Tail light circuits can be damaged if they are overdrawn and the # 118459 eliminates this problem by bypassing the tail light circuits as power sources.
The Curt T-Connector Vehicle Wiring Harness # 55542 that you referenced will draw the power to illuminate your trailer tail lights from the tail light circuits of your vehicle. Whenever available, we recommend people go with wiring harnesses like the # 118459 to prevent any future wiring headaches.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: coupon codes
- Video: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118459 Spec Review
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2009 Toyota Corolla
- Q&A: Best Trailer Hitch Receiver for a 2006 Toyota Corolla Sport
- Q&A: Trailer Hitch Recommendation for 2011 Toyota Corolla
- Q&A: Kuat Transfer Compatibility With a 2006 Toyota Corolla
- Q&A: Solution for Hitch Install Where Weld Nut Broke in Vehicle Frame
- Article: Carrying on a Legacy: One Family’s Story of Grief, Growth, and a Global Pandemic
- Article: Trailer Hitch Installation Tips
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: How To Clean Out Weld Nuts for Trailer Hitch On 2011 Toyota Corolla
- Q&A: Solution for Hitch Install Where Weldnut is Broken
- Q&A: How to Order Replacement Install Hardware for Trailer Hitch

