Adding a 4-Pole Harness to a 2013 Audi Q7 with a Factory 7-Way
Updated 11/17/2020 | Published 11/14/2020
Products Featured in This Question
Question:
Hello, Im trying to find a correct wire connector for my 2013 audi q7 with factory installed trailer hitch and wire. Looks like audi installed a 7 pin female connector. Im trying to connect a 4 pin round connector from a trailer. Which connector do I need? I can provide pictures if needed Thanks
asked by: Eddy
Expert Reply:
It sounds like you're trying to install a standard 4-pole on your vehicle. To add a 4-pole to the factory 7-way on your 2013 Audi Q7, you can use the Hopkins Plug-In Simple Wiring Harness, part # 41155. This will connect into your 7-way and give you the 4-pole you need.
I've linked to a video installation of this harness on a 2018 Dodge Durango so you can see how it works.
However, if you have a 4-way round on your trailer, then you can use two adapters to get it to hook up to your 7-way (one on the trailer and one on your vehicle). On your trailer's 4-way round, you need to convert it into a 4-pole flat using part # ADP001. Then, on your vehicle, plug in part # 47345 into your factory 7-way. The two points should then connect as a 4-pole flat connection. I've linked to video reviews of both of these adapters.
