Dimensions of Mounting Brackets For Door Lift Spring Assembly
Updated 11/06/2020 | Published 11/04/2020
Question:
I have a 1992 feather lite 4 place enclosed snowmobile trailer . The door opening is 92 1/2 “ . Will this spring work? If not is there a self winding spring that will. I don’t have a lot of head room above the door so I was hoping to use this one because if it’s low profile design. Thank you for your time
asked by: Jim W
Expert Reply:
The TRC # 362SW81 Door Lift Spring dimensions of the mounting bracket for the door spring assembly are Spring diameter: 2-3/8", Bracket long length: 5", Bracket long width: 3", and Bracket small length: 1-7/8". I have attached a picture with dimensions.
Regarding your door width, this part works on doors up to 94 inches. You will have to trip the length of cross bar for an exact fit.
Based on the pictures that you have supplied it looks very close. The part of the bracket that is against the door frame is 2" wide and 3" tall which should fit right where that triangle patch is welded. By the way these brackets can also be welded.
