How do I Setup my Reese 49912 Weight Distribution System with Rear Air Bags on my 1996 Chevy Tahoe
Updated 09/28/2020 | Published 09/24/2020
Products Featured in This Question
Question:
I own a 1996 Chevy Tahoe, 5.7L 2 Door, 4x4 with factory installed class 4 hitch. I recently purchased a 27foot KZ camper and the RV center installed a Reese 49912 Weight distribution System. but I was unhappy with the Tahoe leveling when the trailer was attached. I have since installed rear air bags on the Tahoe. The rear air bags arent self-leveling and I dont plan of making them self leveling, I manually adjust the height. My question has two parts 1 should I perform a reinstall of the Reese 49912 now that I have the rear air bags installed? Question 2 what would be the procedure for hooking up the camper, when do I adjust the rear air bags to level the Tahoe? Thank you guys.
asked by: Jeff C
Expert Reply:
Both great questions! To the first yes you should re set your Reese Weight Distribution System w Shank part # RE94FR after installing the air bags like the Firestone Ride-Rite Air Helper Springs part # F2101. As for the second question you should hook up the camper to the vehicle and level it with the air bags. Then hook up your weight distribution system. This will help to aid in your air bags and the weight distribution system working together really well and not over doing the effect.
Continue Researching
- Q&A: What Size Wrenches are Used to Tighten the Curt Hitch Ball Part # C40030
- Q&A: What Size Socket Is Required To Install Nut On 2-5/16" Hitch Ball?
- Q&A: Will the Reese Chain Hangers Work w/ the Curt MV Weight Distribution System?
- Q&A: Recommended Weight Distribution Hitch For A 2022 Dodge Ram 1500 Big Horn Towing A 6K Trailer
- Q&A: Why Do Hitch Extenders Reduce Hitch Capacity but Long Ball Mounts Do Not
- Q&A: Can Weight Distribution Shank be Used Like a Regular Ball Mount
- Q&A: Replacement 18 Inch Shank For Weight Distribution Hitch