Can the 2013 Buick Verano Use a Plug In Style Trailer Wiring Harness

Updated 11/02/2012 | Published 11/01/2012

Question:

Is there a plug in connection by the tail light connection point or do wire connectors need to be used to wire the harness.

asked by: Mike C

Expert Reply:

There is a plug in style connection at the tail light assemblies on your 2013 Buick Verano for the Tow Ready T-One Wiring Harness, # 118564. Once you remove the felt liner covering the back of the tail light assembly, you will see a black connector plugged into the tail light assembly. You will simply unplug that connector to connect the wiring harness.

I have attached a photo from the installation instructions showing what the tail light connector looks like. I have also attached a link to the installation instructions that details the installation process.

This wiring harness also uses a powered converter that will require a power wire to be ran to the vehicle battery. I have attached an help article on routing a power wire for you to check out.

expert reply by: John H