What Are the Dimensions of the Gen-Y Pegasus Shocke Absorbing Gooseneck Coupler

Published 09/22/2020

Question:

Do you still offer any of these models that show a 5 height clearance after coupling? GH-7001, 7011, 7041, 7051, 7061, 7071, 7081, 7091

asked by: Alan B

Helpful Expert Reply:

We currently do not have any videos of this in operation in the environment you mentioned, but I was able to reach out to my tech contact at Gen-Y who provided me with a diagram that you might find helpful to determine if this will work for you.

The # 325-GH-7007 is similar to the # 325-GH-7006 shown in the diagram attached; the difference being that the # 325-GH-7007 has a 2” longer stem on the coupler. All of the height measurements would increase by 2” as I noted on this print. We do have quite a few customers that do use this on flatbeds and the only issue we have seen is if the top of the ball is recessed more than 1” below the surface of the bed.

expert reply by: Erik B

Alan

9/22/2020

Do you still offer any of these models that show a 5 height clearance after coupling? GH-7001, 7011, 7041, 7051, 7061, 7071, 7081, 7091

Erik B.

9/22/2020

We do have several of those models available as well: Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset 2-5/16" Recessed Ball 3.5K TW # 325-GH-7001 Gen-Y Spartan Shock Absorbing Gooseneck Coupler - Offset - 2-5/16" Recessed Ball - 3.5K TW # 325-GH-7011 (square tube) Gen-Y Spartan Shock Absorbing Gooseneck Coupler - Offset - 2-5/16" Recessed Ball - 5.5K TW # 325-GH-7061 Gen-Y Spartan Shock Absorbing Gooseneck Coupler - Offset - 2-5/16" Recessed Ball - 5.5K TW # 325-GH-7071 I've also linked all of our Gen-Y couplers that you may want to have a look at.