Best Hidden Hitch for 2015 Subaru Outback - Curt vs Draw-Tite
Updated 08/11/2020 | Published 08/07/2020 >
Products Featured in This Question
Question:
Hi - Im looking at these two class 3 2inch hitches: https://www.etrailer.com/Trailer-Hitch/Subaru/Outback+Wagon/2015/C13206.html?VehicleID=201532149 and https://www.etrailer.com/Trailer-Hitch/Subaru/Outback+Wagon/2015/75673.html?VehicleID=2015301542 A couple of questions i cant resolve from the photos on your website are: 1 which sits higher and therefore closer to the bumper? ie: slightly lower profile? 2 Ill be using a hitch-mount bike rack softride Dura 4 with the hitch. This statement from the Curt description makes me nervous, and defeats the purpose of the racks ability to tip down to gain access to the trunk... We recommend that all non-trailer loads bike racks, cargo carriers, etc should be supported by stabilizing straps, such as 18050, sold separately
asked by: Phil A
Expert Reply:
The Curt Trailer Hitch # C13206 has a measurement from the ground to the top lip of the trailer of 15-1/2 inches which sits higher than the Draw-Tite Trailer Hitch # 75673 which has a measurement of 15 inches. So far the Curt is winning when it comes to being hidden since it sits about 1/2 inch closer to the bottom of the bumper, but the Draw-Tite is overall more hidden. If you measure from the center of the hitch pin hole to the very edge of your 2015 Subaru Outback of about 5 inches. The Curt only has a measurement of 2-1/2 inches from the hitch pin hole to the very edge of the back bumper. So, the Draw-Tite is going to sit the closest to your rear bumper and will not stick out past your bumper whatsoever which will give you the least noticeable appearance.
So, all in all if you're wanting a trailer hitch that is the most hidden, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75673 is the right hitch for you.
I've included some videos if you still need help deciding.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Q&A: Class III Trailer Hitch for 2016 Subaru Outback that Does Not Require Drilling
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Do the Draw-Tite and Curt Trailer Hitches Require Drilling to Install on a 2017 Subaru Outback Wagon
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Hitch Recommendation For 2017 Subaru Outback to Tow Small Camper
- Q&A: Curt VS Draw-Tite Hidden Cross Tube Trailer Hitch Receivers For a 2018 Subaru Outback
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between The Curt & etrailer Class III 2 Hitch Receiver
- Article: Best Bike Racks for Electric Bikes
- Article: Rooftop Cargo Carriers
- Article: Performance Chips and Modules



