Brakes On A 2017 Jayco Fifth Wheel Pinnacle Dont lock Up After Pulling The Break Away Switch
Updated 08/07/2020 | Published 08/05/2020
Products Featured in This Question
Question:
My brakes aren’t working properly they don’t lock up after pulling the break away switch. We have traced the current to they are working but on a voltage meter reading 3-4 volts. So they are working but not enough current I think. Any help would be appreciated
asked by: Terry
0
Expert Reply:
On your 2017 Jayco Pinnacle Fifth Wheel the break away switch should have it's own battery. If it is only reading 3-4 volts when you pull the break away switch the battery may need to be replaced.
expert reply by:
Shane H
0
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Adding Electric Over Hydraulic Disc Brakes to Boat Trailer
- Q&A: Recommended Actuator and Wiring for Boat Trailer Upgrade From Surge Brakes
- Q&A: Differences Between Marine and Standard Hydrastar Actuators
- Q&A: Parts Needed To Replace Surge Coupler For Disc Brakes With Electric Over Hydraulic