Replacement Knob and Locking Nut for Dutton-Lainson Strong Arm Winch TW4000

Updated 07/30/2020 | Published 07/27/2020

Products Featured in This Question

Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 1,500 lbs

(172)

$344.76

Replacement Flat-Head Nut for Dutton-Lainson StrongArm Electric Winch - Qty 1

(2)

$9.82

Replacement Side Knob for Dutton-Lainson StrongArm Electric Winch - Qty 1

(4)

$11.46

Question:

When getting ready to launch our boat we found the knob used to toggle either engage or freewheel was missing either lost at the dealer who summarizedfoot the boat or on the interstate on the trip. The cover blew off and maybe that action was enough to wind the knob off. We dont know. The winch is lockedfoot so to speak in free wheel and so we can pull the boat out using the manual over-ride and crank with a socket wrench. Id like to order two of these in case it happens again. From the picture you can probably see what is missing. It is all from the outside of the casing and it looks like all parts inside the casing are still intact. Thank you

asked by: Cork H

Expert Reply:

We do have the parts that you're seeking for your Dutton-Lainson TW4000 Strong Arm Winch # DL25200. For the knob (part AR) you'll want to use the # DL94FR and for the locking nut (part AS) you'll use # DL34FR.

expert reply by: Erik B