Does the Trailer Tongue Need to be Cut at an Angle to Install a Fulton Fold-Away Coupler Hinge
Question:
Do I cut the tongue at an angle to fit into the two couplings or just straight across?
asked by: Mike
0
Expert Reply:
You would want to just cut straight across when you install the Fulton Fold-Away Coupler Hinge Kit # FHDPB330301. You could cut the coupler at the same angle as the hinge if you really wanted to, but it is not required.
click to enlarge
expert reply by: Jameson C
0
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- 48 Inch Fold-Away Tongue
- Bolt-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Parts to Convert From 12 Inch Hydraulic to Electric Trailer Brakes
- Can the Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 Be Mounted So the Tongue Swings Up Not Over
- Differences Between the Fulton Coupler Hinge Kits FHDPB330301 and FHDPB330303
- What Size Trailer Tongue Will Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 Fit
- Can Fulton Fold-Away Coupler Hinge Kit # FHDPB330301
- How To Determine Which Fulton Coupler Hinge Kit For Boat Traier
- Adapting Folding Coupler for 3 x 3 Trailer Tongues for Use on 2-1/2-Inch Trailer Frame
- Can the Fulton Fold-Away Coupler, FHDPB330301, Be Mounted So It Folds Upward?
- Where Should a Fulton Fold Away hinge be Located on a Single Jet Ski Trailer
- What Size Is the Pivot Pin for the Fulton Fold-Away Coupler Hinge Kit
- Where to Attach the Safety Chains After Installing the Fulton Fold-Away Coupler Hinge Kit
- Can Fulton Fold-Away Coupler Hinge Kit be Used to Extend Short Trailer Coupler
- Replacement Bolt And Pin For Fold Away Tongue Trailer Coupler
- Should I Use a Bolt On or a Weld on Fold Away Coupler On a Shorelander Trailer with 3x3 Frame
- Can Fulton Fold-Away Coupler Hinge Kit Work in Aluminum Boat Trailer with Galvanized Steel Tongue
- Fulton Fold Away Hinge Kit 3x3 Fit on Trailer Tongue that is 7-3/4 inches Long
- Troubleshooting Up and Down Play with Fulton Swing Away Hinge Kit on a Magic Tilt Boat Trailer
- How Much of the Trailer Tongue Needs to Go Inside Each End of a Fulton Trailer Tongue Hinge Kit
- Replacement Bolt and Pin Recommendation for a Fulton Fold Away Coupler Hinge
- Can You Move the Pivot Pin on a Fulton Fold-Away Coupler to Change Swing Direction
- Replacement Clevis Pin for Fulton Fold-Away Coupler Hinge Kit
- How Much Clearance Needed Between Bed Rails and Bottom of 5th Wheel Trailer Overhang
- What Size is the Pivot Bolt on the Fulton Fold-Away Bolt-On Hinge Kit Part # FHDPB330301
- Recommended Tool to Cut Trailer Tongue to Install Fulton Fold-Away Coupler Hinge Kit FHDPB330301
- Measuring for Fulton Coupler Hinge Kit # FHDPB330301 and Maximum Hinge Distance Allowed from Tongue
- What Tools are Needed to Install Fulton Fold-Away Coupler Hinge Kit, # FHDPB330301
- How To Determine Where To Cut The Tongue When Installing Fold-away Trailer Tongue Hinge