Trailer Towing Capacity of 2005 Chrysler Town & Country Touring Edition

Updated 03/17/2020 | Published 07/16/2009

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(170)

$282.75

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(315)

$34.67

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1360)

$11.31

Question:

Does anyone know the tow capacity of a 2005 chrysler town and country touring 3.8 litre that does not have the tow package?

asked by: Paul

Expert Reply:

I have done some research, and have found that the tow capacity of your 2005 Chrysler Town & Country is 3700 lbs. You will want to check in your owners manual to confirm the towing capacity.
Also, it is important to remember that your towing capacity is limited by the lowest rated component in the towing system, including: vehicle, hitch, ball mount, hitch ball or the capacity of your trailer.

For a hitch (if you don't already have one), I'd recommend the Draw-Tite Class III trailer hitch receiver, part # 75119 if your Town & Country does not have the stow and go seats. If it does, use the # 75305.

To complete your towing system, you might be interested in the following:

Trailer wiring harness with 4-pole trailer connector, part # 118300
Ball mount, part # 2753
1-7/8 inch trailer ball # 19260 or 2 inch ball # 63845

expert reply by: Mike L

Sam H.

3/15/2020

Can my 2005 3.8 Chrysler town and country 2 in ball pull a 7 x 14 inclosed cargo dubbed axel?

Chris R.

3/17/2020

It all depends on how much that 7 x 14 trailer weighs when it's fully loaded. As long as it's under the 3,700 pound limit that Mike pointed out above, you're good to go. I do still recommend verifying this capacity in your copy of the owner's manual just to be safe. All of the component recommendations that Mike listed are also still valid.